/boot/grub/menu.lst on your RH 8 root(assuming that is where you got the GRUB). I am not familar with RH so it may use a different file name for the menu entry.
I managed to install Knoppix 3.2 on my harddrive partitions hda6 (Linux ext3) and hda7 (Linux swap). I already have a Red Hat 8 on the hda1, hda2 and hda3 partitions, including the Grub boot manager.
How can I configure Grub to see the bootable Knoppix partition hda6? Is it just a matter of putting the correct entries into the 'grub.conf' file? If so, which ones? When I boot from CD, I normally use the following entries:
knoppix lang=us noapic 2
/boot/grub/menu.lst on your RH 8 root(assuming that is where you got the GRUB). I am not familar with RH so it may use a different file name for the menu entry.
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT
$134.39
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
ASUS Hyper M.2 x16 Gen 4 RAID Card- Used Working
$32.95
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$17.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
LSI 8 Port 6Gbps PCIe 3.0 External SAS RAID Card w/ 1GB CacheVault & Low Profile
$29.00
Dell H310 SATA SAS RAID Controller Card - HV52W with 1 SFF-8087 Cable, IT Mode
$20.00
ORICO 5 Bay Raid Enclosure USB3.0 SATA External Hard Drive Enclosure Up to 80TB
$42.49
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$139.99