Results 1 to 2 of 2

Thread: How to install Knoppix from USB PenDrive to HDD on a laptop with Win10 pre-installed?

  1. #1
    Senior Member registered user
    Join Date
    Dec 2008
    Location
    Mysore, India
    Posts
    275

    How to install Knoppix from USB PenDrive to HDD on a laptop with Win10 pre-installed?

    Question (1): How to install Knoppix from USB PenDrive to HDD on a laptop with Win10 pre-installed?

    A used laptop received with only Win10 installed. My need is to install Knoppix and Debian and later on do away with Doze.

    The HDD has been suitably partitioned using gparted using Knoppix8.2 on USB PenDrive. The details are here: HP_i3_4Gen_Laptop_rajibando, including setting up the drives where the OSes would be installed.

    How to install first Knoppix 8.2 and then Debian 9.11.0, on the HDD without changing the Doze MBR? I don't want to get rid of Doze immediately. Could the code:
    Code:
    grub-install --root-directory=/media/sdXN /dev/sdX s.t. X=Alphabet letter, N=Number
    help me set up a Grub menu list using the PenDrive Knoppix? Ihave run Debian Set-up and it generates a Menu List, but I have never tested using Knoppix.

    The reason why I can't use Debian first is because I don't want to burn a DVD drive with the Live ISO. Also, I don't know much about the new Grub, the specific (loop) code for Debian Live 9.11.0 to boot the OS from its image and practical issues and trouble-shooting. Which brings me to my next question.

    Question (2): Which among these files are responsible for the Menu-List?

    The files within the boot directory are found by:
    Code:
    /media/sdb1/boot/syslinux$ ls
    balder.img
    bootefi.msg
    boot.msg
    f2
    f3
    german.kbd
    gfxboot.c32
    grub.exe
    ifcpu64.c32
    ldlinux.c32
    libcom32.c32
    libmenu.c32
    libutil.c32
    linux
    linux64
    logo.16
    memdisk
    memtest
    menu.c32
    minirt.gz
    syslinux.cfg
    syslnx32.cfg
    syslnx64.cfg
    vesa.c32
    vesainfo.c32
    vesamenu.c32


    Of these, the binary ones that are eliminated as probable candidates from being Menu-List files are:
    balder.img
    bootefi.msg
    boot.msg
    f2
    f3
    german.kbd
    gfxboot.c32
    grub.exe
    ifcpu64.c32
    ldlinux.c32
    libcom32.c32
    libmenu.c32
    libutil.c32
    linux
    linux64
    logo.16
    memdisk
    memtest
    menu.c32
    minirt.gz
    vesa.c32
    vesainfo.c32
    vesamenu.c32

    Which leaves these probable candidates being Menu-List:
    syslinux.cfg
    syslnx32.cfg
    syslnx64.cfg

    I have only used init 3 code-bit or these three files. This brings me to the third question:

    Question (3): How to compose for a full-fledged menu list?

    I am also testing and preparing a specific loopback code for Debian 9.11.0 simulatneously, but haven't yet found success.

    Any help that could be extended?

  2. #2
    Senior Member registered user
    Join Date
    Dec 2008
    Location
    Mysore, India
    Posts
    275

    [Solved] Debian before Knoppix ...

    In fact, this is easier than it appears!

    I used Debian lxde Live Stretch 9.11.0 DVD, made an exact copy of it on the USB pendrive. Used that drive to install Debian Stretch 9.11.0 on the HDD.

    Following Debian, Knoppix ISO could be extracted and copied to a dedicated partition and Grub be used to boot Knoppix.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


NETGEAR GS305300PAS 5 Port Gigabit Ethernet Unmanaged Switch picture

NETGEAR GS305300PAS 5 Port Gigabit Ethernet Unmanaged Switch

$12.99



Dell X1018 X-Series Smart Managed Switches 16-Port Gigabit 2-Port SFP Switch picture

Dell X1018 X-Series Smart Managed Switches 16-Port Gigabit 2-Port SFP Switch

$45.00



Fortinet FortiSwitch FS-248D-FPOE 48-Port Gigabit PoE Ethernet Network Switch picture

Fortinet FortiSwitch FS-248D-FPOE 48-Port Gigabit PoE Ethernet Network Switch

$99.99



NEW Dell X1018 X-Series Smart Managed Switches 16-Port Gigabit 2-Port SFP Switch picture

NEW Dell X1018 X-Series Smart Managed Switches 16-Port Gigabit 2-Port SFP Switch

$49.00



Cisco WS-C2960-48TT-L Catalyst 2960 48 Port Managed Network Switch picture

Cisco WS-C2960-48TT-L Catalyst 2960 48 Port Managed Network Switch

$32.99



TP-Link TL-SG108 8-Port Gigabit Ethernet Switch picture

TP-Link TL-SG108 8-Port Gigabit Ethernet Switch

$14.99



Tenda 8-Port Gigabit Desktop Switch SG108 NEW picture

Tenda 8-Port Gigabit Desktop Switch SG108 NEW

$15.00



TP-Link TL-SG108PE 8-Port Gigabit Easy Smart Switch with 4-Port PoE picture

TP-Link TL-SG108PE 8-Port Gigabit Easy Smart Switch with 4-Port PoE

$47.80



Cisco WS-C3850-12X48U-S picture

Cisco WS-C3850-12X48U-S

$99.99



Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED picture

Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED

$99.97