Results 1 to 2 of 2

Thread: How to install Knoppix from USB PenDrive to HDD on a laptop with Win10 pre-installed?

  1. #1
    Senior Member registered user
    Join Date
    Dec 2008
    Location
    Mysore, India
    Posts
    272

    How to install Knoppix from USB PenDrive to HDD on a laptop with Win10 pre-installed?

    Question (1): How to install Knoppix from USB PenDrive to HDD on a laptop with Win10 pre-installed?

    A used laptop received with only Win10 installed. My need is to install Knoppix and Debian and later on do away with Doze.

    The HDD has been suitably partitioned using gparted using Knoppix8.2 on USB PenDrive. The details are here: HP_i3_4Gen_Laptop_rajibando, including setting up the drives where the OSes would be installed.

    How to install first Knoppix 8.2 and then Debian 9.11.0, on the HDD without changing the Doze MBR? I don't want to get rid of Doze immediately. Could the code:
    Code:
    grub-install --root-directory=/media/sdXN /dev/sdX s.t. X=Alphabet letter, N=Number
    help me set up a Grub menu list using the PenDrive Knoppix? Ihave run Debian Set-up and it generates a Menu List, but I have never tested using Knoppix.

    The reason why I can't use Debian first is because I don't want to burn a DVD drive with the Live ISO. Also, I don't know much about the new Grub, the specific (loop) code for Debian Live 9.11.0 to boot the OS from its image and practical issues and trouble-shooting. Which brings me to my next question.

    Question (2): Which among these files are responsible for the Menu-List?

    The files within the boot directory are found by:
    Code:
    /media/sdb1/boot/syslinux$ ls
    balder.img
    bootefi.msg
    boot.msg
    f2
    f3
    german.kbd
    gfxboot.c32
    grub.exe
    ifcpu64.c32
    ldlinux.c32
    libcom32.c32
    libmenu.c32
    libutil.c32
    linux
    linux64
    logo.16
    memdisk
    memtest
    menu.c32
    minirt.gz
    syslinux.cfg
    syslnx32.cfg
    syslnx64.cfg
    vesa.c32
    vesainfo.c32
    vesamenu.c32


    Of these, the binary ones that are eliminated as probable candidates from being Menu-List files are:
    balder.img
    bootefi.msg
    boot.msg
    f2
    f3
    german.kbd
    gfxboot.c32
    grub.exe
    ifcpu64.c32
    ldlinux.c32
    libcom32.c32
    libmenu.c32
    libutil.c32
    linux
    linux64
    logo.16
    memdisk
    memtest
    menu.c32
    minirt.gz
    vesa.c32
    vesainfo.c32
    vesamenu.c32

    Which leaves these probable candidates being Menu-List:
    syslinux.cfg
    syslnx32.cfg
    syslnx64.cfg

    I have only used init 3 code-bit or these three files. This brings me to the third question:

    Question (3): How to compose for a full-fledged menu list?

    I am also testing and preparing a specific loopback code for Debian 9.11.0 simulatneously, but haven't yet found success.

    Any help that could be extended?

  2. #2
    Senior Member registered user
    Join Date
    Dec 2008
    Location
    Mysore, India
    Posts
    272

    [Solved] Debian before Knoppix ...

    In fact, this is easier than it appears!

    I used Debian lxde Live Stretch 9.11.0 DVD, made an exact copy of it on the USB pendrive. Used that drive to install Debian Stretch 9.11.0 on the HDD.

    Following Debian, Knoppix ISO could be extracted and copied to a dedicated partition and Grub be used to boot Knoppix.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Juniper QFX5120-32C-AFI 32x100GbE Switch Airflow-Warranty picture

Juniper QFX5120-32C-AFI 32x100GbE Switch Airflow-Warranty

$4959.00



Juniper MX204 +JUNOS and Dual Power Supply + Rack Mount-LIFETIME WARRANTY picture

Juniper MX204 +JUNOS and Dual Power Supply + Rack Mount-LIFETIME WARRANTY

$8959.00



Juniper 48-Port GbE PoE+ & 4-Port 10GB SFP+ Network Switch EX3300-48P w/ License picture

Juniper 48-Port GbE PoE+ & 4-Port 10GB SFP+ Network Switch EX3300-48P w/ License

$49.99



Juniper Networks EX2300-24P 24 Port Gigabit PoE 4 SFP 1/10G Network Switch picture

Juniper Networks EX2300-24P 24 Port Gigabit PoE 4 SFP 1/10G Network Switch

$119.00



Juniper 48-Port PoE GbE Network Switch  w/ Dual Power Supplies F B EX4300-48P picture

Juniper 48-Port PoE GbE Network Switch w/ Dual Power Supplies F B EX4300-48P

$178.99



Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord picture

Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord

$54.99



Juniper EX4300-48T 48 Port 1G 4 QSFP 40G Dual PSU AFO w/ Rails, EX-UM-4X4SFP Mod picture

Juniper EX4300-48T 48 Port 1G 4 QSFP 40G Dual PSU AFO w/ Rails, EX-UM-4X4SFP Mod

$169.00



Juniper EX4600-40F-AFO 24x SFP+/SFP & 4x QSFP+ Ports Switch 2XPSU TESTED picture

Juniper EX4600-40F-AFO 24x SFP+/SFP & 4x QSFP+ Ports Switch 2XPSU TESTED

$749.95



Juniper QFX5100-48S 48-Port 10GbE SFP+ 6x40GbE QSFP Network Switch w/Ears Tested picture

Juniper QFX5100-48S 48-Port 10GbE SFP+ 6x40GbE QSFP Network Switch w/Ears Tested

$599.99



Juniper Networks EX3300-48T 48 Port Gigabit 4x 10 GbE SPF+ Ports Switch - Tested picture

Juniper Networks EX3300-48T 48 Port Gigabit 4x 10 GbE SPF+ Ports Switch - Tested

$50.00