Never done this, but take a peek at the Linux+WinNT-HOWTO (you'll need to install the HOWTOs first, of course.
hello > i have a win2000/knoppix multiboot problem![]()
=----------- .:SYSTEM:. -----------=
AMD Athlon 1700XP processor
256 MB RAM mem
Jetway 866AS ULTRA RAID mobo
Geforce4 MX440 video
2 x 20 GB harddisk
Lite-ON 40x12x48 CDROM
=------------------------------------=
- configuration -
primairy master > 20 GB (NTFS for Windows 2000)
primairy slave > NONE![]()
secundairy master > Lite-ON CDROM
secundairy slave > 20 GB (5GB ext3 / 512 MB swap / 14,5 GB NTFS)![]()
- steps i took -
1. i installed knoppix to the described partitions and i wrote lilo in MBR.
2. after reboot it just booted Win2000 > no lilo shown.
3. used A: to boot in knoppix
4. edited /etc/lilo.conf
5. wrote lilo in MBR
6. still nothing
7. tried to setup the win2000 bootmenu to boot knoppix (followed a tutorial for this)
8. nope...
9. searched google for bootloaders
10. tried a bunch of em
11. still no penguin
- conclusion -
So i think knoppix can't boot from secundairy slave drive > am i correct ??, can anyone confirm this ??
- extra -
1. I HAVE INSTALLED KNOPPIX 25 TIMES IN 2 DAYS(new personal record
)
2. i have had the 10101010101010101010 error lots of times.
3. at one point using bootit (bootloader) i booted knoppix from cd and it put hda,hdd5,hdd6 to desktop what's normal but it also made hdd10,hdd11,hdd12,hdd13,hdd14,hdd15,hdd16,hdd17 and hdd18 > WTF ?? ROFL [ took a lot of rebooting to correct that error ]
Never done this, but take a peek at the Linux+WinNT-HOWTO (you'll need to install the HOWTOs first, of course.
ok...
What does your lilo.conf file look like?
It seems like there isn't an entry in it for the linux side of things. Lilo should have no problem finding a partition on a secondary.
the file is /etc/lilo.conf
and remember run lilo after making and saving any changes to the file.
post the lilo file and I'll et you know the entry you need.
What went wrong? You didn't write LILO to the MBR. Instead you wrote it to the partition you installed Knoppix on. You can fix it. Edit /etc/lilo.conf so that it says:
boot=/dev/hda
Also specify which partition you installed Knnoppix to. For example:
root=/dev/hdb2
As was mentioned by padlamoij don't forget to do: /sbin/lilo. If it returns no errors you are set.
thnx for the hints guys, but i've got it running already
I resized primairy master 20gb NTFS to 15gb and made a 512mb hda2(swap) and a 4,5gb hda3(ext3).
No problems at all LOL
* not quite what i had in mind but i'll take it![]()
--If you still have an installation on hdb, follow what Rickenbacherus recomended in the post above. I had a lilo installation that booted from hda and passed control to a 2nd lilo on hdb. (You need two different lilo.conf files for this, but read the lilo documentation and don't be afraid to experiment.)
Originally Posted by BartOZ
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
881507-001 HPE 2.4TB SAS 12G 10K SC 512E DS G8-G10 Hard Drive 881457-B21 F/S
$274.95
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$24.15
Seagate Exos X16 ST14000NM001G 14TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$169.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$79.99
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$87.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$41.71
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99