has it been formatted ?
I am trying to install an external HD onto my computer where I have Knoppix installed on the HD.
the drive is a Maxtor 80GIG USB 2.0 drive
when I plug it in before I boot the computer the computer sees the drive, but will not let me mount the drive to access it. It talks about the filesystem type could not be determined.
if someone could help me I would like that.
has it been formatted ?
yes.... its formatted for FAT32
I have ran it on WIN98, WINXP and Mac os 9.2
what did cat /proc/partitions tell ?
I am not sure on the termnology that you used.
I have it formated as 1 80 gig FAT32 hard drive
I use it for image editing and carying files between school and home
well when I r- click on the drive it and select properties it says that it has that error, I can not get anyinformation about it
I have a generic USB 2.0 hdd drive caddy and hdd and it didn't take too much effort to get it to work (IANA guru).
First I made a directory to mount to. This was simply /mnt/usbhdd. Then I tested it out with
# mount -t vfat /dev/sda1 /mnt/usbhdd
no problems. I found the device following some suggestions elsewhere on this forum. It was too much hassle entering this each time I started the laptop, so I added the following to the bottom of my /etc/fstab...
/dev/sda1 /mnt/usbhdd vfat defaults,rw,user 0 0
(remember to include a carriage return at the end of the file or it won't work)
One annoying thing is that the drive must be connected before I start the laptop (this includes mounting manually).
After that it was a simple shortcut to the new hard disk directory on the desktop. It's a FAT32 partition like yours, and it appears to have no probs. The speed is fine, even going over a USB 1.0 port.
Hope this helped.
HedRat
it did not work...
but I tried to re-install Knoppix onto my local harddrive and knoppix saw it instantly.
but have been a bad install
CISCO MERAKI MS120-24P-HW 24-PORT GIGABIT CLOUD MANAGED PoE SWITCH - UNCLAIMED
$103.74
Cisco Nexus 48-Port 10G SFP+ Switch N9K-93128TX w/ 9K-M12PQ 12-Port 40G QSFP
$112.49
Cisco Nexus N9K-C92160YC-X 48P 25GbE SFP28 6P QSFP+/QSFP28 PE Switch
$499.00
Cisco WS-C3750X-48PF-S 48 Port PoE Gigabit Switch w/ C3KX-NM-10G & Dual 1100WAC
$121.88
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$30.99
🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥
$6.80
Cisco Nexus N3K-C3064PQ-10GX 48P 10GbE SFP+ 4P QSFP+ Switch (Fair)
$85.00
Cisco Nexus N3K-C3172PQ-10GE 48P 10GbE 6P QSFP+ Switch N3K-C3172PQ-10GE
$189.00
Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack
$110.00
Cisco Catalyst WS-C2960X-24PD-L GigE PoE 370W, 2 x 10G SFP+, LAN Base H22
$94.00