-
Onboard sound and network-OK with CD, not HD install
Great site folks.
I've got Knoppix 3.2 (7-26-2003) and Intel onboard sound and network cards. The sound and network cards wouldn't work initially with the CD, until I read the posts on this site and figured out that I should use the cheatcodes:
knoppix alsa noapic
with these codes, Knoppix works perfectly from the CD.
HOWEVER...
I installed Knoppix to my hard disk using the new script, knoppix-installer. It boots fine, but now I have no sound or network again. My machine also has Windows XP and Suse on it so I'm using the Grub installion from Suse for my bootmanager.
I've looked all over this site, the debian site, and on google for some method of disabling APIC by passing an argument to the kernel from Grub, but everything I've tried hasn't worked. I've tried:
noapic
apic=off
disableapic (this was the way Suse did it)
append=noapic
The kernel is detecting everything fine, lsmod shows the corrected modules loaded. There's definitely some sort of IRQ conflict that's causing the problem and the noapic cheatcode works great for the CD. What to do with the HD install??
I've spent the past 18 years working on DOS/windows machines, but I've only used linux for the past few months.
Thanks.
AK engineer
-
Senior Member
registered user
As root in a console window /etc/init.d/alsa-autoconfig to setup the alsa devices then edit the file /etc/init.d/bootmisc.sh and put the line aumix -w 75 -v 75 at the bottom of the file for the volume to be set at boot time. For the network card make sure the file /etc/network/interfaces looks like this:
Code:
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
# The loopback interface
auto lo
iface lo inet loopback
# The first network card - this entry was created during the Debian installation
# (network, broadcast and gateway are optional)
auto eth0
iface eth0 inet dhcp
Then /etc/init.d/networking restart to re-start the network with the new settings. You may still need the noapic in the GRUB config but I can't be much help there never use it.
-
Well, I went back and reinstalled with the old installation script knx-hdinstall, passed the noapic code to the kernel via GRUB and everything works. I did have to run alsa_init to get the sound working, however.
Not sure what the difference is between the two installation scripts other than setting up user accounts, but something is different...
Similar Threads
-
By Luke Riches in forum Networking
Replies: 2
Last Post: 10-20-2004, 06:39 PM
-
By frank34 in forum The Lounge
Replies: 3
Last Post: 07-26-2004, 02:49 PM
-
By Sukrillux in forum Hardware & Booting
Replies: 5
Last Post: 03-12-2004, 05:39 AM
-
By pwchicken in forum Hardware & Booting
Replies: 1
Last Post: 08-28-2003, 11:41 PM
-
By laffer in forum Hardware & Booting
Replies: 1
Last Post: 08-06-2003, 08:35 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Vintage Apple 2e A2S2064 Desktop 1.023mhz 128k Ram No Storage READ DESCRIPTION
$399.99
RARE Vintage Apple MacBag by Linebacker for Macintosh 128k 512k
$150.00
Macintosh Platinum Mouse - Apple 128K 512K 512Ke Mac Plus Lisa IIe M0100 - NEW
$44.99
1984 APPLE MACINTOSH 128K 40th Anniversary MATCHING # BOX Set 1st Mac M0001 NICE
$7999.99
Vintage Apple Macintosh Classic 128K Application On New 400K Double Density Disk
$26.99
Apple Macintosh 128k 512k Plus Analog Board Capacitor Re-Cap Kit - US Shipping
$23.95
1984 APPLE MACINTOSH Model M0001 1st MAC 128K 40th Anniversary PICASSO KIT NICE
$4999.99
Apple Keyboard and Cable for Macintosh 128k 512k Mac Plus RARE Vintage M0110
$169.99
Apple Macintosh 128K M0001 Computer with Mouse, no keyboard. Case included. 1984
$512.54
Apple Macintosh M0110A Keyboard (Mac 128k/512k/Plus) Tested Working No Cable
$89.99