Results 1 to 3 of 3

Thread: How do I make a cheat-code permanent on Knoppix 8.6.1?

  1. #1

    How do I make a cheat-code permanent on Knoppix 8.6.1?

    Summary:

    How do I make the following cheat-code permanent on knoppix 8.6.1 on usb stick,
    because filesystem type is iso9660 (read-only) and won't let me edit
    /mnt-system/boot/isolinux/isolinux.cfg.

    Cheat code entered at boot prompt: knoppix xmodule=vesa


    Full Details:

    I've just put knoppix 8.6.1 on a usb stick (persistence was there by default).
    But X Window won't display unless I enter the cheat-code "knoppix xmodule=vesa"
    at the initial boot prompt.

    Incidentally, when using Knoppix 7.7.1 on a usb stick, on the EXACT SAME laptop
    (Acer Aspire 5755G), I don't need the cheat-code.

    I'd like to not have to type the cheat-code in every time I boot the 8.6.1, and
    believe that I can achieve that by adding "xmodule=vesa" as a kernel parameter
    on an "APPEND" line in /boot/isolinux/isolinux.cfg.

    I can get to that file using the path
    /mnt-system/boot/isolinux/isolinux.cfg.

    But it won't let me write to that file because /mnt-system is mounted read
    only. When I try to remount /mnt-system as read-write, it says "write-protected."

    /UNIONFS is mounted as read-write, but the path /UNIONFS/boot/isolinux/ does not
    exist.

    I understand that because partition 1 (the main Knoppix system) is filesystem
    type iso9660*, that it is by definition read-only. (*On which I believe
    /boot/isolinux/isolinux.cfg sits).

    Main Question:

    So could you tell me please, what method I need to use to make my cheat-code
    permanent?

    Reason for Using 8.6.1:

    I'm trying out 8.6.1 because it has a newer kernel than 7.7.1, and I've read
    that a newer kernel might fix my problem of downloads halting when the lid is
    closed. I've already tried many lid disabling methods, but none of them prevent
    the downloading from halting.
    Last edited by winger9; 01-02-2020 at 10:26 PM. Reason: text improvement

  2. #2
    Junior Member
    Join Date
    Aug 2011
    Posts
    24
    I do not understand fully your USB stick situation: has it more partitions, 1 containing the Knoppix system with ISO9660 fs (readonly, optical CD fs), and an other one that is rw (maybe FAT32) for persistence?
    If so, you cannot change the
    ISO9660 fs since it is like this: readonly.
    I recommend you to reformat the stick with GParted (for example) to FAT32 fs, and only 1 partition. Then install GRUB2 bootloader to stick (you can use SystemRescueCD). Make a boot directory in the root of the created partition. Store all your live systems here in "boot". Depending of the size of
    USB stick you can download and store many systems.
    Download Knoppix ISO. If you have enough memory, download in /tmp directory (in memory). Extract its whole content into boot/knx/KNOPPIX_NAME directory.
    Then create grub/grub.cfg file and enter in it the appropriate menuentries for Knoppix.
    In the same way you can download and start other live sytems with GRUB2 from the USB stick. You can use persistence, too.
    On the net you will find a lot of information about GRUB2, grub.cfg and menuentry examples for different systems. Also for Knoppix...
    If you take my advice and boot Knoppix in this way, I can give you (if you need) working menuentries for Knoppix, since I use it just in this way: started with GRUB2 from internal and external drives, USB sticks.

  3. #3
    Senior Member registered user
    Join Date
    Dec 2008
    Location
    Mysore, India
    Posts
    272
    Hello, Winger9, kindly accept my wellwishes.
    Have you searched exhaustively the forum threads?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24 picture

Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24

$117.00



H3C SFP-FE-T-A Compatible 100BASE-T SFP Copper RJ-45 100m -93651 picture

H3C SFP-FE-T-A Compatible 100BASE-T SFP Copper RJ-45 100m -93651

$38.00



GENUINE CISCO DS-SFP-FC32G-SW SFP NEW SEALED SEE PHOTOS SHIPS FREE picture

GENUINE CISCO DS-SFP-FC32G-SW SFP NEW SEALED SEE PHOTOS SHIPS FREE

$74.99



Sonicwall 02-SSC-1874 Compatible 10GBASE-T Copper SFP+ RJ-45 30M Transceiver-876 picture

Sonicwall 02-SSC-1874 Compatible 10GBASE-T Copper SFP+ RJ-45 30M Transceiver-876

$189.05



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.00



For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Module 10G SFP+ to RJ45 10GBase-T picture

For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Module 10G SFP+ to RJ45 10GBase-T

$48.59



GENUINE Cisco SFP-GE-T EXT 30-1421-01 USA 1000BASE-T RJ45 SFP Transceiver picture

GENUINE Cisco SFP-GE-T EXT 30-1421-01 USA 1000BASE-T RJ45 SFP Transceiver

$9.99



Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm picture

Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm

$23.99



NEW Sealed Cisco SFP-10G-SR-S 10G SR SFP+ Module 850nmMM *US Shipping* picture

NEW Sealed Cisco SFP-10G-SR-S 10G SR SFP+ Module 850nmMM *US Shipping*

$15.00



LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module picture

LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module

$89.00