-
Knoppix 9.0.0 is out ...
Hello,
Knoppix 9.0.0 is out. Thank you Klaus !
No idea how to get my hands on it though ...
With the travel ban and CA is not really close to Germany anyway.
Stay healthy,
Gilles
http://www.knopper.net/knoppix/knoppix900.html
-
Senior Member
registered user
Thank you for the information.
Debian has also released a Stretch 9.12 as a security update.
Already downloaded and using Knoppix 8.6.1. It won't be feasible to download the latest release. However, when the Knoppix reaches the end cycle of Buster, then that ISO shall be downloaded.
Once again, thank you for the good news.
Regards,
Rajib
-
Knoppix 9 dual boot from iso on win 10 ntfs nvme partition.
Hi Klaus,
I hope my email finds you and your loved one healthy and happy.
I am just sharing some findings that you may be interested in adding into your next Knoppix release. I finally managed to dual boot natively Knoppix 9 from the iso image located in the Win 10 ntfs partition of the nvme ssd drive of my new machine and that was more complicated than I initially thought. Most of my problems came from the outdated version of busybox in the initrd which 1) was not seeing the large (>255) major device nodes and 2) could not see the content of the mounted ntfs partition because it was too large. After recompiling a standalone version of busybox with the proper options (and there is quite a few of them that matter) I also had to update the init boot script to replace all the "let" bash calls by "$(eval )" because I could not figure out how you got busybox to recognize that "let" applet. Finally I also had to add a couple lines in the init script to add the missing device nodes for the nvme partitions because udev is not yet running to discover them in the early stages of the boot. BTW, I also added support to boot from mmc cards which are available on most new laptops. If you are interested I will be more than happy to share my updated initrd which contains the new: init script, busybox and also some missing kernel modules (fuse, virtual machines hardware and all network cards support).
Best Regards,
Gilles
http://s94002264.onlinehome.us/grub/k900/minirt_900.gz
http://s94002264.onlinehome.us/grub/k900/minirt_900.tgz
kernel /linux64 bootfrom=/dev/nvme0n1p2/[bB][oO][oO][tT]/k900/*.iso myconf=scan ...
initrd /minirt_900.gz
Last edited by ruymbeke; 06-22-2020 at 08:08 AM.
-
Good, but from where can we get iso image - Corona Lockout
Can you share the Ver 9 - EN iso image, know it is huge, but will be useful for knoppix users.
U can use sourceforge or google drive.
Thanks for sharing.
Originally Posted by
ruymbeke
Hi Klaus,
I hope my email finds you and your loved one healthy and happy.
I am just sharing some findings that you may be interested in adding into your next Knoppix release. I finally managed to dual boot natively Knoppix 9 from the iso image located in the Win 10 ntfs partition of the nvme ssd drive of my new machine and that was more complicated than I initially thought. Most of my problems came from the outdated version of busybox in the initrd which 1) was not seeing the large (>255) major device nodes and 2) could not see the content of the mounted ntfs partition because it was too large. After recompiling a standalone version of busybox with the proper options (and there is quite a few of them that matter) I also had to update the init boot script to replace all the "let" bash calls by "$(eval )" because I could not figure out how you got busybox to recognize that "let" applet. Finally I also had to add a couple lines in the init script to add the missing device nodes for the nvme partitions because udev is not yet running to discover them in the early stages of the boot. BTW, I also added support to boot from mmc cards which are available on most new laptops. If you are interested I will be more than happy to share my updated initrd which contains the new: init script, busybox and also some missing kernel modules (fuse, virtual machines hardware and all network cards support).
Best Regards,
Gilles
http://s94002264.onlinehome.us/grub/k900/minirt_900.gz
http://s94002264.onlinehome.us/grub/k900/minirt_900.tgz
kernel /linux64 bootfrom=/dev/nvme0n1p2/[bB][oO][oO][tT]/k900/*.iso myconf=scan ...
initrd /minirt_900.gz
-
Senior Member
registered user
Originally Posted by
ruymbeke
Hi Klaus,
I hope my email finds you and your loved one healthy and happy.
I am just sharing some findings that you may be interested in adding into your next Knoppix release. I finally managed to dual boot natively Knoppix 9 from the iso image located in the Win 10 ntfs partition of the nvme ssd drive of my new machine and that was more complicated than I initially thought. Most of my problems came from the outdated version of busybox in the initrd which 1) was not seeing the large (>255) major device nodes and 2) could not see the content of the mounted ntfs partition because it was too large. After recompiling a standalone version of busybox with the proper options (and there is quite a few of them that matter) I also had to update the init boot script to replace all the "let" bash calls by "$(eval )" because I could not figure out how you got busybox to recognize that "let" applet. Finally I also had to add a couple lines in the init script to add the missing device nodes for the nvme partitions because udev is not yet running to discover them in the early stages of the boot. BTW, I also added support to boot from mmc cards which are available on most new laptops. If you are interested I will be more than happy to share my updated initrd which contains the new: init script, busybox and also some missing kernel modules (fuse, virtual machines hardware and all network cards support).
Best Regards,
Gilles
http://s94002264.onlinehome.us/grub/k900/minirt_900.gz
http://s94002264.onlinehome.us/grub/k900/minirt_900.tgz
kernel /linux64 bootfrom=/dev/nvme0n1p2/[bB][oO][oO][tT]/k900/*.iso myconf=scan ...
initrd /minirt_900.gz
Great!
Seems to me that this should be merged into the standard distro if it isn't already?
Would be nice to have the busybox updating recipe too, plus possibly just the patched init script.
-
Hello folks,
with Knoppix 9.0 >>
the (busyBox) Shell script /sbin/shutdown' tells you, that
'shutdown -r' now is possible only with command
'shutdown reboot', but reboot doesn't work
(it does lead to 'poweroff').
because i always do shutdown
via PuTTY, i missed this feature
really (with tears in my eyes)
many greetings,
Fred
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
1TB/2TB USB 3.0 Flash Drive Thumb U Disk Memory Stick Pen PC Laptop Storage lot
$80.39
Monterey - Apple MacBook Pro 15" 1TB SSD 16GB i7 3.40Ghz Retina - ALLSTATE
$499.50
Type C USB 3.0 Flash Drive Thumb Drive Memory Stick for PC Laptop 1TB 2TB lot
$73.29
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$19.99
Samsung - Geek Squad Certified Refurbished 870 EVO 1TB SATA Solid State Drive
$67.99
1TB SATA 3.5" HDD Mixed Brand Mixed Speed WD HGST Seagate Hitachi
$12.95
Fanxiang M.2 SATA SSD 2TB 1TB 512GB 256GB SSD Internal M2 Solid State Drive Lot
$21.99
Fanxiang 4TB 2TB 1TB SSD 550MB/s 2.5'' SATA III Internal Solid State Drive lot
$208.99
4TB Ssd 870 Internal Solid State Drive Hard Disk 2.5 Inch Sata Iii 2TB Ssd
$33.99