-
Knoppix 9.0.0 is out ...
Hello,
Knoppix 9.0.0 is out. Thank you Klaus !
No idea how to get my hands on it though ...
With the travel ban and CA is not really close to Germany anyway.
Stay healthy,
Gilles
http://www.knopper.net/knoppix/knoppix900.html
-
Senior Member
registered user
Thank you for the information.
Debian has also released a Stretch 9.12 as a security update.
Already downloaded and using Knoppix 8.6.1. It won't be feasible to download the latest release. However, when the Knoppix reaches the end cycle of Buster, then that ISO shall be downloaded.
Once again, thank you for the good news.
Regards,
Rajib
-
Knoppix 9 dual boot from iso on win 10 ntfs nvme partition.
Hi Klaus,
I hope my email finds you and your loved one healthy and happy.
I am just sharing some findings that you may be interested in adding into your next Knoppix release. I finally managed to dual boot natively Knoppix 9 from the iso image located in the Win 10 ntfs partition of the nvme ssd drive of my new machine and that was more complicated than I initially thought. Most of my problems came from the outdated version of busybox in the initrd which 1) was not seeing the large (>255) major device nodes and 2) could not see the content of the mounted ntfs partition because it was too large. After recompiling a standalone version of busybox with the proper options (and there is quite a few of them that matter) I also had to update the init boot script to replace all the "let" bash calls by "$(eval )" because I could not figure out how you got busybox to recognize that "let" applet. Finally I also had to add a couple lines in the init script to add the missing device nodes for the nvme partitions because udev is not yet running to discover them in the early stages of the boot. BTW, I also added support to boot from mmc cards which are available on most new laptops. If you are interested I will be more than happy to share my updated initrd which contains the new: init script, busybox and also some missing kernel modules (fuse, virtual machines hardware and all network cards support).
Best Regards,
Gilles
http://s94002264.onlinehome.us/grub/k900/minirt_900.gz
http://s94002264.onlinehome.us/grub/k900/minirt_900.tgz
kernel /linux64 bootfrom=/dev/nvme0n1p2/[bB][oO][oO][tT]/k900/*.iso myconf=scan ...
initrd /minirt_900.gz
Last edited by ruymbeke; 06-22-2020 at 08:08 AM.
-
Good, but from where can we get iso image - Corona Lockout
Can you share the Ver 9 - EN iso image, know it is huge, but will be useful for knoppix users.
U can use sourceforge or google drive.
Thanks for sharing.
Originally Posted by
ruymbeke
Hi Klaus,
I hope my email finds you and your loved one healthy and happy.
I am just sharing some findings that you may be interested in adding into your next Knoppix release. I finally managed to dual boot natively Knoppix 9 from the iso image located in the Win 10 ntfs partition of the nvme ssd drive of my new machine and that was more complicated than I initially thought. Most of my problems came from the outdated version of busybox in the initrd which 1) was not seeing the large (>255) major device nodes and 2) could not see the content of the mounted ntfs partition because it was too large. After recompiling a standalone version of busybox with the proper options (and there is quite a few of them that matter) I also had to update the init boot script to replace all the "let" bash calls by "$(eval )" because I could not figure out how you got busybox to recognize that "let" applet. Finally I also had to add a couple lines in the init script to add the missing device nodes for the nvme partitions because udev is not yet running to discover them in the early stages of the boot. BTW, I also added support to boot from mmc cards which are available on most new laptops. If you are interested I will be more than happy to share my updated initrd which contains the new: init script, busybox and also some missing kernel modules (fuse, virtual machines hardware and all network cards support).
Best Regards,
Gilles
http://s94002264.onlinehome.us/grub/k900/minirt_900.gz
http://s94002264.onlinehome.us/grub/k900/minirt_900.tgz
kernel /linux64 bootfrom=/dev/nvme0n1p2/[bB][oO][oO][tT]/k900/*.iso myconf=scan ...
initrd /minirt_900.gz
-
Senior Member
registered user
Originally Posted by
ruymbeke
Hi Klaus,
I hope my email finds you and your loved one healthy and happy.
I am just sharing some findings that you may be interested in adding into your next Knoppix release. I finally managed to dual boot natively Knoppix 9 from the iso image located in the Win 10 ntfs partition of the nvme ssd drive of my new machine and that was more complicated than I initially thought. Most of my problems came from the outdated version of busybox in the initrd which 1) was not seeing the large (>255) major device nodes and 2) could not see the content of the mounted ntfs partition because it was too large. After recompiling a standalone version of busybox with the proper options (and there is quite a few of them that matter) I also had to update the init boot script to replace all the "let" bash calls by "$(eval )" because I could not figure out how you got busybox to recognize that "let" applet. Finally I also had to add a couple lines in the init script to add the missing device nodes for the nvme partitions because udev is not yet running to discover them in the early stages of the boot. BTW, I also added support to boot from mmc cards which are available on most new laptops. If you are interested I will be more than happy to share my updated initrd which contains the new: init script, busybox and also some missing kernel modules (fuse, virtual machines hardware and all network cards support).
Best Regards,
Gilles
http://s94002264.onlinehome.us/grub/k900/minirt_900.gz
http://s94002264.onlinehome.us/grub/k900/minirt_900.tgz
kernel /linux64 bootfrom=/dev/nvme0n1p2/[bB][oO][oO][tT]/k900/*.iso myconf=scan ...
initrd /minirt_900.gz
Great!
Seems to me that this should be merged into the standard distro if it isn't already?
Would be nice to have the busybox updating recipe too, plus possibly just the patched init script.
-
Hello folks,
with Knoppix 9.0 >>
the (busyBox) Shell script /sbin/shutdown' tells you, that
'shutdown -r' now is possible only with command
'shutdown reboot', but reboot doesn't work
(it does lead to 'poweroff').
because i always do shutdown
via PuTTY, i missed this feature
really (with tears in my eyes)
many greetings,
Fred
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$721.06
Dell PowerEdge R630 8SFF 2.6Ghz 20-Core 128GB Mem 4x1G RJ-45 NIC 2x750W PSU
$399.04
~DAILY DEALZ ~ Apple Mac Pro: Intel Xeon 32GB RAM 1TB SSD 1 Year Warranty
$284.99
CSE-118 Supermicro 1U 3x GPU Server 2.1Ghz 16-C 128GB CX353A 2x1600W PSU Rails
$450.03
Intel Xeon E5-2690V2 3.00GHz 10-Core (SR1A5) Processor CPU READ DESCRIPTION
$12.00
Intel Xeon E5-2697 V4 2.30 GHz 18C 2011-3 2400MHz 45MB 145W SR2JV CPU Processor
$49.99
Intel Xeon Gold 6138 2.0GHz 27.5MB 20-Core 125W LGA3647 SR3B5
$46.00
Intel Xeon e5-2698v3 2.30Ghz 16 Core 32 Thread CPU SR1XE
$20.99
HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram 512 SSD Quadro K420 Linux GA
$243.59
Dell Precision 3420 SFF Intel Xeon E3-1220 v5 16GB RAM 240GB SSD Win 10 Desktop
$119.99