Results 1 to 6 of 6

Thread: Knoppix 9.0.0 is out ...

  1. #1
    Moderator Moderator
    Join Date
    Mar 2004
    Location
    Menlo Park, California
    Posts
    674

    Knoppix 9.0.0 is out ...

    Hello,
    Knoppix 9.0.0 is out. Thank you Klaus !
    No idea how to get my hands on it though ...
    With the travel ban and CA is not really close to Germany anyway.
    Stay healthy,
    Gilles

    http://www.knopper.net/knoppix/knoppix900.html

  2. #2
    Senior Member registered user
    Join Date
    Dec 2008
    Location
    Mysore, India
    Posts
    272
    Thank you for the information.
    Debian has also released a Stretch 9.12 as a security update.
    Already downloaded and using Knoppix 8.6.1. It won't be feasible to download the latest release. However, when the Knoppix reaches the end cycle of Buster, then that ISO shall be downloaded.
    Once again, thank you for the good news.
    Regards,
    Rajib

  3. #3
    Moderator Moderator
    Join Date
    Mar 2004
    Location
    Menlo Park, California
    Posts
    674

    Knoppix 9 dual boot from iso on win 10 ntfs nvme partition.

    Hi Klaus,
    I hope my email finds you and your loved one healthy and happy.
    I am just sharing some findings that you may be interested in adding into your next Knoppix release. I finally managed to dual boot natively Knoppix 9 from the iso image located in the Win 10 ntfs partition of the nvme ssd drive of my new machine and that was more complicated than I initially thought. Most of my problems came from the outdated version of busybox in the initrd which 1) was not seeing the large (>255) major device nodes and 2) could not see the content of the mounted ntfs partition because it was too large. After recompiling a standalone version of busybox with the proper options (and there is quite a few of them that matter) I also had to update the init boot script to replace all the "let" bash calls by "$(eval )" because I could not figure out how you got busybox to recognize that "let" applet. Finally I also had to add a couple lines in the init script to add the missing device nodes for the nvme partitions because udev is not yet running to discover them in the early stages of the boot. BTW, I also added support to boot from mmc cards which are available on most new laptops. If you are interested I will be more than happy to share my updated initrd which contains the new: init script, busybox and also some missing kernel modules (fuse, virtual machines hardware and all network cards support).
    Best Regards,
    Gilles

    http://s94002264.onlinehome.us/grub/k900/minirt_900.gz
    http://s94002264.onlinehome.us/grub/k900/minirt_900.tgz

    kernel /linux64 bootfrom=/dev/nvme0n1p2/[bB][oO][oO][tT]/k900/*.iso myconf=scan ...
    initrd /minirt_900.gz
    Last edited by ruymbeke; 06-22-2020 at 08:08 AM.

  4. #4
    Junior Member
    Join Date
    Nov 2005
    Posts
    7

    Good, but from where can we get iso image - Corona Lockout

    Can you share the Ver 9 - EN iso image, know it is huge, but will be useful for knoppix users.

    U can use sourceforge or google drive.

    Thanks for sharing.


    Quote Originally Posted by ruymbeke View Post
    Hi Klaus,
    I hope my email finds you and your loved one healthy and happy.
    I am just sharing some findings that you may be interested in adding into your next Knoppix release. I finally managed to dual boot natively Knoppix 9 from the iso image located in the Win 10 ntfs partition of the nvme ssd drive of my new machine and that was more complicated than I initially thought. Most of my problems came from the outdated version of busybox in the initrd which 1) was not seeing the large (>255) major device nodes and 2) could not see the content of the mounted ntfs partition because it was too large. After recompiling a standalone version of busybox with the proper options (and there is quite a few of them that matter) I also had to update the init boot script to replace all the "let" bash calls by "$(eval )" because I could not figure out how you got busybox to recognize that "let" applet. Finally I also had to add a couple lines in the init script to add the missing device nodes for the nvme partitions because udev is not yet running to discover them in the early stages of the boot. BTW, I also added support to boot from mmc cards which are available on most new laptops. If you are interested I will be more than happy to share my updated initrd which contains the new: init script, busybox and also some missing kernel modules (fuse, virtual machines hardware and all network cards support).
    Best Regards,
    Gilles

    http://s94002264.onlinehome.us/grub/k900/minirt_900.gz
    http://s94002264.onlinehome.us/grub/k900/minirt_900.tgz

    kernel /linux64 bootfrom=/dev/nvme0n1p2/[bB][oO][oO][tT]/k900/*.iso myconf=scan ...
    initrd /minirt_900.gz

  5. #5
    Senior Member registered user
    Join Date
    Sep 2006
    Posts
    802
    Quote Originally Posted by ruymbeke View Post
    Hi Klaus,
    I hope my email finds you and your loved one healthy and happy.
    I am just sharing some findings that you may be interested in adding into your next Knoppix release. I finally managed to dual boot natively Knoppix 9 from the iso image located in the Win 10 ntfs partition of the nvme ssd drive of my new machine and that was more complicated than I initially thought. Most of my problems came from the outdated version of busybox in the initrd which 1) was not seeing the large (>255) major device nodes and 2) could not see the content of the mounted ntfs partition because it was too large. After recompiling a standalone version of busybox with the proper options (and there is quite a few of them that matter) I also had to update the init boot script to replace all the "let" bash calls by "$(eval )" because I could not figure out how you got busybox to recognize that "let" applet. Finally I also had to add a couple lines in the init script to add the missing device nodes for the nvme partitions because udev is not yet running to discover them in the early stages of the boot. BTW, I also added support to boot from mmc cards which are available on most new laptops. If you are interested I will be more than happy to share my updated initrd which contains the new: init script, busybox and also some missing kernel modules (fuse, virtual machines hardware and all network cards support).
    Best Regards,
    Gilles

    http://s94002264.onlinehome.us/grub/k900/minirt_900.gz
    http://s94002264.onlinehome.us/grub/k900/minirt_900.tgz

    kernel /linux64 bootfrom=/dev/nvme0n1p2/[bB][oO][oO][tT]/k900/*.iso myconf=scan ...
    initrd /minirt_900.gz
    Great!
    Seems to me that this should be merged into the standard distro if it isn't already?
    Would be nice to have the busybox updating recipe too, plus possibly just the patched init script.

  6. #6
    Junior Member
    Join Date
    May 2010
    Posts
    2
    Hello folks,

    with Knoppix 9.0 >>
    the (busyBox) Shell script /sbin/shutdown' tells you, that
    'shutdown -r' now is possible only with command
    'shutdown reboot', but reboot doesn't work
    (it does lead to 'poweroff').

    because i always do shutdown
    via PuTTY, i missed this feature
    really (with tears in my eyes)

    many greetings,
    Fred

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge R620 Server | 2x 2680 V2 2.8GHz = 20 Cores | 96GB | 2x 1TB SAS picture

Dell PowerEdge R620 Server | 2x 2680 V2 2.8GHz = 20 Cores | 96GB | 2x 1TB SAS

$338.99



Dell PowerEdge T130 Intel Xeon E3-1220 v5 8GB RAM 1TB HDD VGA USB Win 10 Server picture

Dell PowerEdge T130 Intel Xeon E3-1220 v5 8GB RAM 1TB HDD VGA USB Win 10 Server

$309.99



Dell PowerEdge R630 Server | 2x E5-2680v3 24cores 2.4GHz | 128GB | H730 | 2x750W picture

Dell PowerEdge R630 Server | 2x E5-2680v3 24cores 2.4GHz | 128GB | H730 | 2x750W

$530.00



Dell PowerEdge R620 Server | 2x E5-2680 V2 2.8GHz =20 Cores | 128GB | 2x 1TB SAS picture

Dell PowerEdge R620 Server | 2x E5-2680 V2 2.8GHz =20 Cores | 128GB | 2x 1TB SAS

$324.99



Dell PowerEdge R620 Server 2x E5-2650L V2 2.6GHz =20 Cores | 32GB | 2x 1TB SATA picture

Dell PowerEdge R620 Server 2x E5-2650L V2 2.6GHz =20 Cores | 32GB | 2x 1TB SATA

$185.60



Dell PowerEdge R620 Server | 2x E5-2650 V2 2.6GHz =16 Cores | 32GB | 2x trays picture

Dell PowerEdge R620 Server | 2x E5-2650 V2 2.6GHz =16 Cores | 32GB | 2x trays

$145.99



Dell Poweredge R620 2x E5-2670 2.6ghz 16-Cores / 32gb / H710 / 2x Trays / 750w picture

Dell Poweredge R620 2x E5-2670 2.6ghz 16-Cores / 32gb / H710 / 2x Trays / 750w

$89.99



Dell PowerEdge R710 Server | 2x X5650 =12 Cores | 32GB RAM | H700 | 2x 300GB SAS picture

Dell PowerEdge R710 Server | 2x X5650 =12 Cores | 32GB RAM | H700 | 2x 300GB SAS

$173.99



Dell PowerEdge R620 Server 2x E5-2680 V2 2.8GHz =20 Cores 128GB DVD 8x 300GB SAS picture

Dell PowerEdge R620 Server 2x E5-2680 V2 2.8GHz =20 Cores 128GB DVD 8x 300GB SAS

$322.99



Dell PowerEdge R620 Server 2x E5-2680 V2 2.8GHz = 20 Cores 128GB RAM 2x trays picture

Dell PowerEdge R620 Server 2x E5-2680 V2 2.8GHz = 20 Cores 128GB RAM 2x trays

$262.99