[Solved] Use apt-get update as a super-user to have synaptic working
As usual I use unpacked KNOPPIX_V8.6.1-2019-10-14-EN.iso and booted with Grub to create a persistent system. In general, I have long been using synaptic to install additional software persistent across multiple reboots.
With the current version, I have run into an issue. I get the notice from synaptic:
I checked the /etc/apt/sources.listE: The value 'stable' is invalid for APT::Default-Release as such a release is not available in the sources
E: _cache->open() failed, please report.
The keyword 'stable' shouldn't be an issue, but is presently. Shall the keywords be replaced by exact words? Like stable=buster, oldstable=stretch, unstable=Sid, oldoldstable=jessie and so on?
[Solved] Use apt-get update as a super-user to have synaptic working
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
ASUS Hyper M.2 x16 Gen 4 RAID Card- Used Working
$32.95
Sans Digital 2 Bay SATA to eSATA/ USB 2.0 RAID JBOD
$79.35
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$17.99
Dell H310 SATA SAS RAID Controller Card - HV52W with 1 SFF-8087 Cable, IT Mode
$20.00
LSI 8 Port 6Gbps PCIe 3.0 External SAS RAID Card w/ 1GB CacheVault & Low Profile
$24.65
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$131.59
Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 Type B For 3.5" SATA HDDs
$69.91