ntpdate is now deprecated, advised 'sntp', but how to automate its running during each session startup?
Currently, have to run:
on a terminal after startup to keep the ntp updated and running.Code:$ sudo /etc/init.d/ntp start
Knoppix 8.6.1 doesn't do this automatically.
TheUSAGE section isn't very clear.Code:man sntp
Last edited by rajibando; 05-27-2020 at 04:04 PM.
SAS - HGST Ultrastar 7K4000 HUS724040ALA640 0F14688 3.5" 4TB 7.2K RPM 64MB HDD
$19.99
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Hitachi 4TB 3.5" Hard Drive HUS724040ALE640 Ultrastar 7K4000 Internal 7.2K
$49.95
WD 4TB Gold Enterprise - 7200 RPM SATA 6Gb/s 128MB CACHE 3.5" HDD - WD4002FYYZ
$42.95
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
1TB HDD/SSD 2.5" SATA Hard Drive with Windows 10 or Windows 11 Pro Installed
$18.99
Seagate Exos X20 18TB SATA 6Gb/s 3.5" Enterprise Hard Drive - ST18000NM003D
$168.00
Western Digital DC HC320 Ultrastar 8TB 7200RPM SATA HD, HUS728T8TALE6L4, 0B36404
$99.00
Seagate Enterprise Capacity 8TB 7200 RPM Internal Hard Drive ST8000NM0045
$29.95