-
Inexplicable emergence of boot error msg: but nothing else has changed!
Have been using 8.6.0 on a 32G FAT32 boot stick since forever.
Seamless. Perfect every time. No glitches.
The stick has one partition showing as /dev/sda1. (The host HD is /dev/nvme0n1..)
There is no additional partition /dev/sda[234].
Just lately red script caught my eye during the boot process.
The message vanishes so rapidly I had to video the boot process to catch it.
I get AS USUAL:
Knoppix 8.6 found at /dev/sda1
>>> Starting lin Live-Mode
>>> Please do not remove medium until shutdown!
But this is NEW:
Using /dev/sda3 (rw) [in yellow]
mount: mounting /dev/sda3 on /KNOPPIX-DATA failed: No such device
sb: Used: bad number
Overlay /KNOPPIX-DATA: partition s too small (<400M) [in shocking red]
Can anybody explain this? I repeat: there is no sda3 (or 2 ; or 4).
It looks as though mounting sda3 is part of some hardwired boot script fragment, but this has not occurred before.
Or confirm my only theory so far: the stick is on its way out and notwithstanding a clean report from all of
fdisk -l
dosfsck -r
chkdsk /f [in Windows]
it should be replaced.
But it would ne nice to KNOW, not merely GUESS.
Thank you!
-
Press Ctrl-Alt-F1 and you can see the boot messages (on tty1), no need to make video. To return to X (tty6): Alt-F6.
If your stick has only 1 partition, then the PC should have the "sda3". Otherwise, when you run KNX from a stick, the stick part. will be sdb and the hosting PC part. sda (if the stick and PC has only one-one drive with one-one part.).
You can use various commands to get detailed information: lsblk, lsusb, blkid, parted -s /dev/sdX p (where X can be a, b, c...).
After that, study the /init script which purpose is:
# 1. Mounting CD, DVD, Flashdisk or network drive,
# 2. unifying read-only compressed file system and ramdisk or file overlay,
# 3. give control to the real sysv init, which then continues to work like
# we booted from a single disk partition.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Juniper EX2200-C-12T-2G Fanless 12-port Ethernet Switch with 2 SFP
$75.77
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$29.91
Juniper EX3300-48P 48-Port 10/100/1000BASE-T (48 PoE+ ports) with 4 SFP+
$74.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$59.95
Juniper Networks SRX345 Gateway Appliance
$195.00
Juniper 48-Port PoE GbE Network Switch w/ 4-Port 10GB SFP+ Module EX4300-48P
$179.99
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$140.00
Juniper EX3400-48P 48 Port Switch PoE+ 4x SFP+ 2x QSFP 1xAC *Tested/Warranty*
$139.95
JUNIPER ELECTRONICS NFX250-ATT-LS1
$250.00
Juniper Networks SRX220 8-Port Gigabit Services Gateway Security Appliance
$45.00