Results 1 to 2 of 2

Thread: Inexplicable emergence of boot error msg: but nothing else has changed!

  1. #1
    Member registered user
    Join Date
    Dec 2006
    Posts
    49

    Inexplicable emergence of boot error msg: but nothing else has changed!

    Have been using 8.6.0 on a 32G FAT32 boot stick since forever.
    Seamless. Perfect every time. No glitches.
    The stick has one partition showing as /dev/sda1. (The host HD is /dev/nvme0n1..)
    There is no additional partition /dev/sda[234].
    Just lately red script caught my eye during the boot process.
    The message vanishes so rapidly I had to video the boot process to catch it.

    I get AS USUAL:
    Knoppix 8.6 found at /dev/sda1
    >>> Starting lin Live-Mode
    >>> Please do not remove medium until shutdown!
    But this is NEW:
    Using /dev/sda3 (rw) [in yellow]
    mount: mounting /dev/sda3 on /KNOPPIX-DATA failed: No such device
    sb: Used: bad number
    Overlay /KNOPPIX-DATA: partition s too small (<400M) [in shocking red]

    Can anybody explain this? I repeat: there is no sda3 (or 2 ; or 4).
    It looks as though mounting sda3 is part of some hardwired boot script fragment, but this has not occurred before.
    Or confirm my only theory so far: the stick is on its way out and notwithstanding a clean report from all of
    fdisk -l
    dosfsck -r
    chkdsk /f [in Windows]
    it should be replaced.

    But it would ne nice to KNOW, not merely GUESS.

    Thank you!

  2. #2
    Junior Member
    Join Date
    Aug 2011
    Posts
    24
    Press Ctrl-Alt-F1 and you can see the boot messages (on tty1), no need to make video. To return to X (tty6): Alt-F6.

    If your stick has only 1 partition, then the PC should have the "sda3". Otherwise, when you run KNX from a stick, the stick part. will be sdb and the hosting PC part. sda (if the stick and PC has only one-one drive with one-one part.).
    You can use various commands to get detailed information: lsblk, lsusb, blkid, parted -s /dev/sdX p (where X can be a, b, c...).

    After that, study the /init script which purpose is:
    # 1. Mounting CD, DVD, Flashdisk or network drive,
    # 2. unifying read-only compressed file system and ramdisk or file overlay,
    # 3. give control to the real sysv init, which then continues to work like
    # we booted from a single disk partition.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco SG95-16 16-Port Gigabit Switch SG95-16-KR picture

Cisco SG95-16 16-Port Gigabit Switch SG95-16-KR

$47.00



Cisco 1100 Terminal - gateway - rack-mountable C1100TGX-1N24P32A picture

Cisco 1100 Terminal - gateway - rack-mountable C1100TGX-1N24P32A

$1349.00



Cisco RV320 Dual WAN VPN 4 Port Gigabit Router w/ Web Filtering RV320-WB-K9-NA picture

Cisco RV320 Dual WAN VPN 4 Port Gigabit Router w/ Web Filtering RV320-WB-K9-NA

$374.00



Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24 picture

Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24

$117.00



Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod picture

Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod

$83.00



Cisco QSFP-40G-SR-BD BiDi Short-reach Transceiver, 1 Year Warranty picture

Cisco QSFP-40G-SR-BD BiDi Short-reach Transceiver, 1 Year Warranty

$17.25



Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850 picture

Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850

$38.99



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.00



Cisco WS-C3850-48F-S Catalyst 3850 48x 1GB PoE+ RJ-45 1x Module Switch picture

Cisco WS-C3850-48F-S Catalyst 3850 48x 1GB PoE+ RJ-45 1x Module Switch

$185.00



Cisco C9300-48 48 Port Switch Dual PSU W/C9300-NM-8X P/N: C9300-48U-A Tested picture

Cisco C9300-48 48 Port Switch Dual PSU W/C9300-NM-8X P/N: C9300-48U-A Tested

$799.99