Results 1 to 2 of 2

Thread: Inexplicable emergence of boot error msg: but nothing else has changed!

  1. #1
    Member registered user
    Join Date
    Dec 2006
    Posts
    47

    Inexplicable emergence of boot error msg: but nothing else has changed!

    Have been using 8.6.0 on a 32G FAT32 boot stick since forever.
    Seamless. Perfect every time. No glitches.
    The stick has one partition showing as /dev/sda1. (The host HD is /dev/nvme0n1..)
    There is no additional partition /dev/sda[234].
    Just lately red script caught my eye during the boot process.
    The message vanishes so rapidly I had to video the boot process to catch it.

    I get AS USUAL:
    Knoppix 8.6 found at /dev/sda1
    >>> Starting lin Live-Mode
    >>> Please do not remove medium until shutdown!
    But this is NEW:
    Using /dev/sda3 (rw) [in yellow]
    mount: mounting /dev/sda3 on /KNOPPIX-DATA failed: No such device
    sb: Used: bad number
    Overlay /KNOPPIX-DATA: partition s too small (<400M) [in shocking red]

    Can anybody explain this? I repeat: there is no sda3 (or 2 ; or 4).
    It looks as though mounting sda3 is part of some hardwired boot script fragment, but this has not occurred before.
    Or confirm my only theory so far: the stick is on its way out and notwithstanding a clean report from all of
    fdisk -l
    dosfsck -r
    chkdsk /f [in Windows]
    it should be replaced.

    But it would ne nice to KNOW, not merely GUESS.

    Thank you!

  2. #2
    Junior Member
    Join Date
    Aug 2011
    Posts
    21
    Press Ctrl-Alt-F1 and you can see the boot messages (on tty1), no need to make video. To return to X (tty6): Alt-F6.

    If your stick has only 1 partition, then the PC should have the "sda3". Otherwise, when you run KNX from a stick, the stick part. will be sdb and the hosting PC part. sda (if the stick and PC has only one-one drive with one-one part.).
    You can use various commands to get detailed information: lsblk, lsusb, blkid, parted -s /dev/sdX p (where X can be a, b, c...).

    After that, study the /init script which purpose is:
    # 1. Mounting CD, DVD, Flashdisk or network drive,
    # 2. unifying read-only compressed file system and ramdisk or file overlay,
    # 3. give control to the real sysv init, which then continues to work like
    # we booted from a single disk partition.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


OPENEYE OE-MTX48 Micro Server With Linux OS 48TB picture

OPENEYE OE-MTX48 Micro Server With Linux OS 48TB

$115.00



873830-S01 HPE ProLiant MicroServer Gen10 X3216 1P 8GB-U 4LFF NHP SATA 200W picture

873830-S01 HPE ProLiant MicroServer Gen10 X3216 1P 8GB-U 4LFF NHP SATA 200W

$199.00



HPE 658553-001 ProLiant MicroServer Ultra Micro Tower Server - 1 x AMD Turion II picture

HPE 658553-001 ProLiant MicroServer Ultra Micro Tower Server - 1 x AMD Turion II

$85.00



DATTO-1000 Mini PC Micro Server 8GB RAM picture

DATTO-1000 Mini PC Micro Server 8GB RAM

$74.98



Super Micro 1u ServerX8SIL picture

Super Micro 1u ServerX8SIL

$50.00



HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server P54644001 picture

HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server P54644001

$699.99



HPE 658553-001 ProLiant MicroServer Ultra Micro Tower Server - 1 x AMD Turion II picture

HPE 658553-001 ProLiant MicroServer Ultra Micro Tower Server - 1 x AMD Turion II

$365.00



HPE ProLiant MicroServer G10 v2 16GB Ultra Micro Tower Server P54644-001 picture

HPE ProLiant MicroServer G10 v2 16GB Ultra Micro Tower Server P54644-001

$579.00



HP ProLiant Micro Server Gen8 Pentium 2.5GHz (8GB RAM 4 Caddies) No HDD picture

HP ProLiant Micro Server Gen8 Pentium 2.5GHz (8GB RAM 4 Caddies) No HDD

$144.82



HP ProLiant MicroServer  HSTNS-51151                   (Read Description) picture

HP ProLiant MicroServer HSTNS-51151 (Read Description)

$185.00