Results 1 to 2 of 2

Thread: Inexplicable emergence of boot error msg: but nothing else has changed!

  1. #1
    Member registered user
    Join Date
    Dec 2006
    Posts
    49

    Inexplicable emergence of boot error msg: but nothing else has changed!

    Have been using 8.6.0 on a 32G FAT32 boot stick since forever.
    Seamless. Perfect every time. No glitches.
    The stick has one partition showing as /dev/sda1. (The host HD is /dev/nvme0n1..)
    There is no additional partition /dev/sda[234].
    Just lately red script caught my eye during the boot process.
    The message vanishes so rapidly I had to video the boot process to catch it.

    I get AS USUAL:
    Knoppix 8.6 found at /dev/sda1
    >>> Starting lin Live-Mode
    >>> Please do not remove medium until shutdown!
    But this is NEW:
    Using /dev/sda3 (rw) [in yellow]
    mount: mounting /dev/sda3 on /KNOPPIX-DATA failed: No such device
    sb: Used: bad number
    Overlay /KNOPPIX-DATA: partition s too small (<400M) [in shocking red]

    Can anybody explain this? I repeat: there is no sda3 (or 2 ; or 4).
    It looks as though mounting sda3 is part of some hardwired boot script fragment, but this has not occurred before.
    Or confirm my only theory so far: the stick is on its way out and notwithstanding a clean report from all of
    fdisk -l
    dosfsck -r
    chkdsk /f [in Windows]
    it should be replaced.

    But it would ne nice to KNOW, not merely GUESS.

    Thank you!

  2. #2
    Junior Member
    Join Date
    Aug 2011
    Posts
    24
    Press Ctrl-Alt-F1 and you can see the boot messages (on tty1), no need to make video. To return to X (tty6): Alt-F6.

    If your stick has only 1 partition, then the PC should have the "sda3". Otherwise, when you run KNX from a stick, the stick part. will be sdb and the hosting PC part. sda (if the stick and PC has only one-one drive with one-one part.).
    You can use various commands to get detailed information: lsblk, lsusb, blkid, parted -s /dev/sdX p (where X can be a, b, c...).

    After that, study the /init script which purpose is:
    # 1. Mounting CD, DVD, Flashdisk or network drive,
    # 2. unifying read-only compressed file system and ramdisk or file overlay,
    # 3. give control to the real sysv init, which then continues to work like
    # we booted from a single disk partition.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


VINTAGE GENUINE APPLE MACINTOSH SOFT SIDED PADDED CARRY BAG CASE EARLY 1990s picture

VINTAGE GENUINE APPLE MACINTOSH SOFT SIDED PADDED CARRY BAG CASE EARLY 1990s

$248.76



VINTAGE GENUINE APPLE STYLEWRITER II SOFT SIDED PADDED CARRY BAG CASE CIRCA 1993 picture

VINTAGE GENUINE APPLE STYLEWRITER II SOFT SIDED PADDED CARRY BAG CASE CIRCA 1993

$134.85



Casio HW-JS Vintage Word Processor w/ Printer picture

Casio HW-JS Vintage Word Processor w/ Printer

$75.00



RARE VINTAGE AOL SOFTWARE FOR MAC MACINTOSH v. 2.5 on TWO 800K FLOPPY DISKS  NEW picture

RARE VINTAGE AOL SOFTWARE FOR MAC MACINTOSH v. 2.5 on TWO 800K FLOPPY DISKS NEW

$12.99



CUSTOM Retro Restored Commodore 64 Computer Tested Vintage 1980s C64 Plus Manual picture

CUSTOM Retro Restored Commodore 64 Computer Tested Vintage 1980s C64 Plus Manual

$188.88



Radio Shack Vintage Pc Circuit Boards picture

Radio Shack Vintage Pc Circuit Boards

$40.00



Atari 800XL Retro Computer Vintage Computing Gaming - Untested - No Power Supply picture

Atari 800XL Retro Computer Vintage Computing Gaming - Untested - No Power Supply

$119.99



Lot Of 2

Lot Of 2 "As Is" Vintage Miniscribe 3180E 5.25" HH ESDI Drives

$95.00



Vintage Toshiba SatellitePro 435CDS Retro Laptop • Pentium 16MB CD-ROM POSTS picture

Vintage Toshiba SatellitePro 435CDS Retro Laptop • Pentium 16MB CD-ROM POSTS

$89.00



Vintage IBM Aptiva E-5u  Desktop Computer. IBM’s First Sub-$1000 Computer. picture

Vintage IBM Aptiva E-5u Desktop Computer. IBM’s First Sub-$1000 Computer.

$140.00