This message occurring during boot up of KNOPPIX-Live has no deleterious consequences but it is an annoyance.
It is probably an unintended hangover from the HD-installed version which allocates several partitions.
Either ignore it or include a (2nd and) 3rd (and 4th) partition in your boot device, even if it is a USB stick.
Use fdisk* to set /dev/{sda}1 as the KNOPPIX partition type c (being FAT32; or NTFS if you prefer - I've never tried this).
Set /dev/{sda}3 as type 83 (Linux) (at least 400M). Then format it as Reiserfs with mkreiserfs .
It's not obvious to me how (or even whether) the partition is used; but it is made available; and you will boot
without the annoying error message!
(*) Yes: you need to format your intended USB device - from a temporary KNOPPIX USB device is probably your most
convenient method ;o)
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
LSI 9223-8I 6GBPS PCIe SAS Internal RAID Controller
$22.75
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 04Y5H1 High Profile
$17.99