This message occurring during boot up of KNOPPIX-Live has no deleterious consequences but it is an annoyance.
It is probably an unintended hangover from the HD-installed version which allocates several partitions.
Either ignore it or include a (2nd and) 3rd (and 4th) partition in your boot device, even if it is a USB stick.
Use fdisk* to set /dev/{sda}1 as the KNOPPIX partition type c (being FAT32; or NTFS if you prefer - I've never tried this).
Set /dev/{sda}3 as type 83 (Linux) (at least 400M). Then format it as Reiserfs with mkreiserfs .
It's not obvious to me how (or even whether) the partition is used; but it is made available; and you will boot
without the annoying error message!
(*) Yes: you need to format your intended USB device - from a temporary KNOPPIX USB device is probably your most
convenient method ;o)
Juniper EX4300-24T Layer 3 24 Ports Manageable Ethernet Switch 1 Year Warranty
$139.00
Juniper EX3300-48T-BF 48 Port 4 X Expansion Slots Layer 3 Switch 1 Year Warranty
$235.00
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord
$54.99
Juniper Networks EX2300-24P 24 Port Gigabit PoE 4 SFP 1/10G Network Switch
$115.00
EX2300-24P Juniper 24-port 10/100/1000BASE-T PoE+ 4 x 1/10GbE SFP/SFP+ UNCLAIMED
$450.00
Juniper Networks EX3400-48P 48x Gigabit PoE+ RJ45 2x 40Gb/s QSFP+ Switch
$166.24
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$41.28
Juniper EX2300-48P PoE+ Switch 48x 1GbE & 4 SFP+/SFP 10G uplinks, Tested
$289.00