This message occurring during boot up of KNOPPIX-Live has no deleterious consequences but it is an annoyance.
It is probably an unintended hangover from the HD-installed version which allocates several partitions.
Either ignore it or include a (2nd and) 3rd (and 4th) partition in your boot device, even if it is a USB stick.
Use fdisk* to set /dev/{sda}1 as the KNOPPIX partition type c (being FAT32; or NTFS if you prefer - I've never tried this).
Set /dev/{sda}3 as type 83 (Linux) (at least 400M). Then format it as Reiserfs with mkreiserfs .
It's not obvious to me how (or even whether) the partition is used; but it is made available; and you will boot
without the annoying error message!
(*) Yes: you need to format your intended USB device - from a temporary KNOPPIX USB device is probably your most
convenient method ;o)
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$30.00
Cisco Meraki Transceiver Module MA-SFP-1GB-SX
$39.99
Lifetime Warranty X520-DA2 Intel 10GB SFP+ Dual Port + 2x 10G Optics 2x 2M Cable
$25.00
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$74.99
Cisco SFP-10G-SR 10-2415-03 10 Gigabit Transceiver LOT OF 8
$24.00
INTEL 10G SFP+ SR SFP E10GSFPSR FTLX8571D3BCV-IT For X520-DA2 X520-SR2 X710-DA2
$9.49
Genuine Cisco SFP-10G-SR 0-2415-03 10 Gigabit Transceiver
$4.90
🔥🔥🔥Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver 10-2415-03 🔥🔥🔥
$8.00
SuperMicro AOC-STGN-I2S Rev 2.11 Dual-Port SFP+ 10 Gigabit Low Profile Card
$27.00
CISCO SFP-10G-LR Transceiver Single Mode 10-2457-02 10GBase-LR 1310nm Module
$15.03