This message occurring during boot up of KNOPPIX-Live has no deleterious consequences but it is an annoyance.
It is probably an unintended hangover from the HD-installed version which allocates several partitions.
Either ignore it or include a (2nd and) 3rd (and 4th) partition in your boot device, even if it is a USB stick.
Use fdisk* to set /dev/{sda}1 as the KNOPPIX partition type c (being FAT32; or NTFS if you prefer - I've never tried this).
Set /dev/{sda}3 as type 83 (Linux) (at least 400M). Then format it as Reiserfs with mkreiserfs .
It's not obvious to me how (or even whether) the partition is used; but it is made available; and you will boot
without the annoying error message!
(*) Yes: you need to format your intended USB device - from a temporary KNOPPIX USB device is probably your most
convenient method ;o)
Cisco SFP-10G-SR 10-2415-03 10 Gigabit Transceiver WARRANTY LOT OF 10 @ Q
$29.99
Finisar FTLX8571D3BCV 10Gb/s 850nm SFP+ Multimode Transceiver LOT OF 10 @ Q
$29.99
Cisco SFP-10G-SR++Transceiver Module
$99.99
Cisco SFP-10G-SR 10-2415-03 10 Gigabit Transceiver LOT OF 10
$34.94
Lot of 10 - SFP-10G-SR OEM CISCO 10-2415-03 850nm 10GBASE-SR SFP+
$16.99
INTEL 10G SFP+ SR SFP E10GSFPSR FTLX8571D3BCV-IT For X520-DA2 X520-SR2 X710-DA2
$9.49
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver 10-2415-03
$8.00
Cisco SFP-10G-SR-S 10-3105-01 Transceiver Module LOT OF 2 @ T
$14.99
Cisco SFP-10G-SR 10-2415-03 10 Gigabit Transceiver LOT OF 100 @ Q
$299.00
Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm
$27.99