To see what driver it's using issue this command from a shell: lsmodOriginally Posted by andymadigan
You should be able to find your wireless driver in the list.
Probably prism2 or orinoco.
I don't understand how, but my Linksys WUSB11 version 2.6 works with knoppix. It wasn't recognized the first time. But now it is! This card is not supported by wlan-ng or Red Hat 8 or 9. Could someone please tell me where the driver came from?
P.S. Thanks to whoever made this, I've been stuck with M$ for so long I thought I was gonna go crazy!
To see what driver it's using issue this command from a shell: lsmodOriginally Posted by andymadigan
You should be able to find your wireless driver in the list.
Probably prism2 or orinoco.
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$24.22
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.50
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.50