Hi. I was wondering if it is possible to network boot knoppix , while hosting files on windows.
I set up tftp on windows , and knoppix booted but not loaded entirely. I set up nfs on windows and exported mnt-sysem. set up ip and directory in the configuration of tftp , but unfortunately knoppix showed some error (can not access tty and problem with nfs4 handler or something like this). Booting knoppix in virtual box and starting terminal server does not work. virtual box and booting computer are not in the same network and i was unable to make them to see each other.
So how to set up knoppix to boot from network , while hosting files on windows?
Thanks, best regards.
HP ProLiant MicroServer Gen8 G8 G2020T 8GB RAM 4x 1TB HDD 4x 3.5" 712318-421
$249.99
$198.00
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
HP Proliant MicroServer (Model: HSTNS-5151) NO HARD DRIVES-Power Tested,
$99.99
HP ProLiant MicroServer Gen8 | Intel XEON E3-1220L V2 | 8GB RAM | NO HDD | 4 BAY
$249.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
Barracuda Supermicro CSE-825 720w PSU 2U 8 Bay Barebones
$169.95
Supermicro 1U Server X9SRI-F Xeon E5-2640 v2 2.5Ghz 16-Cores / 64GB / No HDD
$149.99
2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL
$299.00