Hi. I was wondering if it is possible to network boot knoppix , while hosting files on windows.
I set up tftp on windows , and knoppix booted but not loaded entirely. I set up nfs on windows and exported mnt-sysem. set up ip and directory in the configuration of tftp , but unfortunately knoppix showed some error (can not access tty and problem with nfs4 handler or something like this). Booting knoppix in virtual box and starting terminal server does not work. virtual box and booting computer are not in the same network and i was unable to make them to see each other.
So how to set up knoppix to boot from network , while hosting files on windows?
Thanks, best regards.
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.52
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$89.99
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
1TB HDD/SSD 2.5" SATA Hard Drive with Windows 10 or Windows 11 Pro Installed
$17.99
SEAGATE 4TB 3.5" SAS HDD 7200 RPM ST4000NM0005, GRADE A, SKU 5057
$13.99
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.52
Western Digital Gold Enterprise 4TB,7200 RPM Internal Hard Disk Drive WD4002FYYZ
$39.95