Hi. I was wondering if it is possible to network boot knoppix , while hosting files on windows.
I set up tftp on windows , and knoppix booted but not loaded entirely. I set up nfs on windows and exported mnt-sysem. set up ip and directory in the configuration of tftp , but unfortunately knoppix showed some error (can not access tty and problem with nfs4 handler or something like this). Booting knoppix in virtual box and starting terminal server does not work. virtual box and booting computer are not in the same network and i was unable to make them to see each other.
So how to set up knoppix to boot from network , while hosting files on windows?
Thanks, best regards.
Western Digital WD140EDGZ 14 TB, Internal, 5400 RPM, 3.5 inch Hard Drive
$99.00
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Hitachi 4TB 3.5" Hard Drive HUS724040ALE640 Ultrastar 7K4000 Internal 7.2K
$49.95
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
1TB HDD/SSD 2.5" SATA Hard Drive with Windows 10 or Windows 11 Pro Installed
$18.99
Seagate Exos X20 18TB SATA 6Gb/s 3.5" Enterprise Hard Drive - ST18000NM003D
$168.00
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.41
SAS - HGST Ultrastar 7K4000 HUS724040ALA640 0F14688 3.5" 4TB 7.2K RPM 64MB HDD
$19.99