-
Senior Member
registered user
9/05/03 too many broken things, rolling back to 4/5/03
Hi;
I upgraded my hdd install from 4/5/03 to 9/05/03.
I noticed changes, not all for the better.
I uninstalled 9/05/03, did a clean reinstall just to check and then reinstalled 4/5/03.
I have new hardware. I bought my system in March 2003.
4/05/03 detected and configured all of my hardware perfectly without any effort from me.
9/05/03:
- didn't quite get my monitor (multisyncy lcd 1530v ) right. When I hit the
autoconfigure on the monitor the words became blurry and half of my
"screen" shot off to the right horizontally. 4/05/03 worked perfectly
with the autoconfigure.
- 4/05/03 all I had to do to get xine working was to dowload the dvd cracker
libs mentioned in the faq. No fuss, no muss. 9/05/03 set /dev/dvd to
"Knoppix/dev/dvd". It also could not detect my dvd player properly
running dmesg produced all sorts of errors. Trying to start xine made
it and the terminal hang.
- using XMMS to play a cd resulted in XMMS trying to play my radio
card instead. no such problem in 4/05/03.
- icewm 1.2.12 is BUGGY.
I don't want to complain for no reason.
If someone who has the power to change knoppix wants to work with me to figure out this apparent step backwards I will be glad to keep my system as it is for a few days to try to debug things so Knoppix can keep getting better with newer versions.
Thanks in advance
Steve
-
Senior Member
registered user
Re: 9/05/03 too many broken things, rolling back to 4/5/03
Originally Posted by
beforewisdom
Hi;
I upgraded my hdd install from 4/5/03 to 9/05/03.
I noticed changes, not all for the better.
I uninstalled 9/05/03, did a clean reinstall just to check and then reinstalled 4/5/03.
I have new hardware. I bought my system in March 2003.
4/05/03 detected and configured all of my hardware perfectly without any effort from me.
9/05/03:
- didn't quite get my monitor (multisyncy lcd 1530v ) right. When I hit the
autoconfigure on the monitor the words became blurry and half of my
"screen" shot off to the right horizontally. 4/05/03 worked perfectly
with the autoconfigure.
- 4/05/03 all I had to do to get xine working was to dowload the dvd cracker
libs mentioned in the faq. No fuss, no muss. 9/05/03 set /dev/dvd to
"Knoppix/dev/dvd". It also could not detect my dvd player properly
running dmesg produced all sorts of errors. Trying to start xine made
it and the terminal hang.
- using XMMS to play a cd resulted in XMMS trying to play my radio
card instead. no such problem in 4/05/03.
- icewm 1.2.12 is BUGGY.
I don't want to complain for no reason.
If someone who has the power to change knoppix wants to work with me to figure out this apparent step backwards I will be glad to keep my system as it is for a few days to try to debug things so Knoppix can keep getting better with newer versions.
Thanks in advance
Steve
For the last one with icewm, thats a problem of debian ... Anyway good to know ...
The /dev/dvd-Problem did I introduce ... Sorry for that.
Just do as root:
rm -f /dev/dvd
ln -s /dev/cdrom /dev/dvd
rm -f /dev/cdaudio
ln -s /dev/cdrom /dev/cdaudio
And dvd and audio should work again ...
Hm, for the monitor problem, could you try to boot the CD with "knoppix noddc" or "knoppix xvrefresh=75" or "knoppix xvrefresh=60" ...
Then if you have a working configuration copy /etc/X11/XF86Config-4 to /yourrootpart/etc/X11/XF86Config-4 ...
Yes, we did change something in X-Detection-Process ... (So that some people can work with 100 Hz )
Please report a bug for that last one ...
Kano deserves it
cu
Fabian
-
Senior Member
registered user
Re: 9/05/03 too many broken things, rolling back to 4/5/03
Originally Posted by
Fabianx
For the last one with icewm, thats a problem of debian ... Anyway good to know ...
The /dev/dvd-Problem did I introduce ... Sorry for that.
Just do as root:
rm -f /dev/dvd
ln -s /dev/cdrom /dev/dvd
rm -f /dev/cdaudio
ln -s /dev/cdrom /dev/cdaudio
And dvd and audio should work again ...
Hm, for the monitor problem, could you try to boot the CD with "knoppix noddc" or "knoppix xvrefresh=75" or "knoppix xvrefresh=60" ...
Then if you have a working configuration copy /etc/X11/XF86Config-4 to /yourrootpart/etc/X11/XF86Config-4 ...
Yes, we did change something in X-Detection-Process ... (So that some people can work with 100 Hz )
Please report a bug for that last one ...
Kano deserves it
cu
Fabian
None of that helped.
I can roll back to a June release of Knoppix I have that works out of the box.
However, I would like to help debug 9/5/03.
Working through the forum is kind of slow and frustrating.
I would be willing to make an appointment to meet via IM ( or private irc channel ) sometime this weekend to help debug all of this...........if that is helpful to you/the knoppix people.
If it isn't let me know and I will just roll back.
If you think it would be helpful to future knoppix releases post some times you can do it this weekend. I am in the eastern time zone in the US.
Steve
Similar Threads
-
By rfarmer in forum General Support
Replies: 2
Last Post: 01-30-2004, 01:22 AM
-
By stukennedyuk in forum General Support
Replies: 8
Last Post: 10-29-2003, 02:57 AM
-
By beforewisdom in forum Hdd Install / Debian / Apt
Replies: 8
Last Post: 09-01-2003, 03:42 AM
-
By beforewisdom in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 08-24-2003, 09:16 AM
-
By fingers99 in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 05-26-2003, 01:32 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
Dell Poweredge R730xd 2.5in 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$189.99