But it does work from CD ?Originally Posted by mihaval
Please reinstall the new 3.3-ISO to HD with "knoppix-installer" having both mice attached, while booting knoppix. (if you want to use debian-mode)
cu
Fabian
Hi!
I have a problem with Knoppix on my notebook. It is knoppix 3.2, installed on the hard drive (via knx-hdinstall). It boots, works, but not with a mouse. I have attached PS/2 Compaq mouse with wheel, but it does not work with or without the mouse. The notebook has a touchpad and a "stick", and I've even disabled touchpad, to no avail.
Any ideas?
Thanks,
Miha.
But it does work from CD ?Originally Posted by mihaval
Please reinstall the new 3.3-ISO to HD with "knoppix-installer" having both mice attached, while booting knoppix. (if you want to use debian-mode)
cu
Fabian
So, it is compaq evo n600c, and the mouse is not working.
If I do a cat /dev/psaux I see the garbage characters, so it is definitely getting something. And /dev/mouse is linked to that. But in X, it is not working.
Ideas, suggestions?
Thanks,
Miha.
Tried the pci=irqmask=0x0e98 cheat code. Same thing. Message at boot time is that it discovers Generic PS/2 mouse. I then tried nowheel option and the mouse jumps to the top right part of the screen and if I move it, I get left and right clikcs (erratic behaviour -- worst than when it was not wokring at all ).
Help, please!
BTW, on slackware9, the mouse was working perfectly, even the touch pad and the stick on the notebook.
Regards,
Miha.
May be you have a duplicated mouse signal fron console.
Try this:
modify your "/etc/gpm.conf" as follows
--
device=/dev/psaux
responsiveness=
repeat_type=raw <---------- importat line (type raw)
type=ps2
append=""
--
Good luck
Dell Poweredge R640 Server | 2x Silver 4114 20 Cores | 192GB | 8x HDD Trays
$1939.99
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Dell Emc R750 Computer Poweredge edge racked server.
$750.00
Dell PowerEdge R730, 2 sinks, SystemBoard, 8 trays,H330,Idrac 8 exp, 2x750w Psu
$135.00
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
DELL PowerEdge R630 8SFF Server 2x E5-2680v3 2.5GHz =24 Cores 128GB H730 4xRJ45
$360.00