--See this:
ftp://ftp.uni-kl.de/pub/linux/knoppi...cheatcodes.txt
...and try some of the "no"xxx cheatcodes (nodma, noscsi, etc.)
Originally Posted by JustMike
As in the subject... the same thing has happened on the following machines when booting from the CD:
- ASUS A7A266 (ALi chipset), T-Bird 1.2, 512MB, Promise UltraTX100-2 card, ATI ALL-IN-WONDER 7500, Intel 10/100 PCI, ASUS DVD-ROM (boot) and Sony 24x CD-RW
- Soltek SL-75FRN2 (Nvidia nForce2), XP 2400, 512MB, Promise UltraTX100-2 card, ATI ALL-IN-WONDER 7500, Intel 10/100 PCI, ASUS DVD-ROM (boot) and Sony 24x CD-RW
Knoppix 3.2 worked flawlessly (aside from the on-board network) on the second machine, but hung at the same place as 3.3.
I am not a Linux newbie, but am a Knoppix newbie. I can provide any information that might be useful. (I am typing this on RH9 on the second machine)
--See this:
ftp://ftp.uni-kl.de/pub/linux/knoppi...cheatcodes.txt
...and try some of the "no"xxx cheatcodes (nodma, noscsi, etc.)
Originally Posted by JustMike
Are there any particular "cheatcodes" that might be applicable here?
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.34
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99
Western Digital DC HC320 Ultrastar 8TB 7200RPM SATA HD, HUS728T8TALE6L4, 0B36404
$99.00