-
Junior Member
registered user
Problems with Release V3.3 2003-09-22
Problems with Release V3.3 2003-09-22 (and since Prerelease V3.3)
'myconfig=scan' produces the required result except for '.bashrc'. 'My '.bashrc' has been disregarded. Any reason?
The ADSL- USB Speedtouch modem is no langer working. It has been configured according to the instructions of David Abdelli in http://david.abdelli.free.fr/speedtouch/en/index.html and has been working nicely with all the different Knoppix versions since May.
Anybody experiencing the same problems?
Thanks for any help or hint!
Georges.
-
Junior Member
registered user
Re: Problems with Release V3.3 2003-09-22
Originally Posted by
mzee
Problems with Release V3.3 2003-09-22 (and since Prerelease V3.3)
'myconfig=scan' produces the required result except for '.bashrc'. 'My '.bashrc' has been disregarded. Any reason?
The ADSL- USB Speedtouch modem is no langer working. It has been configured according to the instructions of David Abdelli in
http://david.abdelli.free.fr/speedtouch/en/index.html and has been working nicely with all the different Knoppix versions since May.
Hard to understand why no reactions ...
No other people who are feeling unhappy because losing their '.bashrc' with Knoppix 3.3?
Further thought many people are having an USB ADSL Alcatel Speedtouch. And nobody complaining Knoppix 3.3 is not allowing them to use it. Nobody is getting following message when booting Release V3.3 2003-09-22?
"
insmod: insmod: a module named atm already exists
insmod: insmod: insmod: lib/modules/2.4.22-xfs/kernel/net/atm/atm.o failed
insmod: insmod: insmod: speedtch failed
"
In Version 3.3 2003-09-24 (Small Bug Fix?) this error message is no longer there but in both versions the Speedtouch module is available : 'speedtch.o'
Any info or help will be greatly appreciated ...
Regards,
Georges.
-
Senior Member
registered user
Re: Problems with Release V3.3 2003-09-22
1. Download the latest rev (9-24) and see if the problems persist ( http://www.knopper.net/knoppix-mirrors/index-en.html )
2. As a workaround (yes I know it's inconvenient and bugs suck, but here you go) you can ' . .bashrc ' (from your home dir; full syntax would be ' source ~/.bashrc '. Edit .bashrc and throw ' echo "Bashrc ran" ' in there at the end to make sure.
Originally Posted by
mzee
Originally Posted by
mzee
Problems with Release V3.3 2003-09-22 (and since Prerelease V3.3)
'myconfig=scan' produces the required result except for '.bashrc'. 'My '.bashrc' has been disregarded. Any reason?
The ADSL- USB Speedtouch modem is no langer working. It has been configured according to the instructions of David Abdelli in
http://david.abdelli.free.fr/speedtouch/en/index.html and has been working nicely with all the different Knoppix versions since May.
Hard to understand why no reactions ...
No other people who are feeling unhappy because losing their '.bashrc' with Knoppix 3.3?
Further thought many people are having an USB ADSL Alcatel Speedtouch. And nobody complaining Knoppix 3.3 is not allowing them to use it. Nobody is getting following message when booting Release V3.3 2003-09-22?
"
insmod: insmod: a module named atm already exists
insmod: insmod: insmod: lib/modules/2.4.22-xfs/kernel/net/atm/atm.o failed
insmod: insmod: insmod: speedtch failed
"
In Version 3.3 2003-09-24 (Small Bug Fix?) this error message is no longer there but in both versions the Speedtouch module is available : 'speedtch.o'
Any info or help will be greatly appreciated ...
Regards,
Georges.
-
Junior Member
registered user
Re: Problems with Release V3.3 2003-09-22
Originally Posted by
Dave_Bechtel
1. Download the latest rev (9-24) and see if the problems persist (
http://www.knopper.net/knoppix-mirrors/index-en.html )
2. As a workaround (yes I know it's inconvenient and bugs suck, but here you go) you can ' . .bashrc ' (from your home dir; full syntax would be ' source ~/.bashrc '. Edit .bashrc and throw ' echo "Bashrc ran" ' in there at the end to make sure.
Thanks for reaction.
I had already downloaded the latest 2003-09-24 version.
The problem with my '.bashrc' is that it is no longer there. Must have been overwritten by the skelet '.bashrc'. So "source ~/.bashrc" is possible but has no sense ...
I boot with "knoppix home=scan myconfig =scan". Knoppix 3.3 finds my home and configs on USB memory stick '/dev/sda1' but overwrites my '.bashrc'. (Knoppix 3.2 respected my '.bashrc'!!)
Also : it seems in 3.3 there is a 'speedtouch.o'-module which - I fear - interferes with my Speedtouch settings. But where can I find info on that module. Nothing to be found in the 'Changelog' . And Knoppix without access to the www ...
Anyway thanks for attention.
Regards,
Georges.
-
yes, I have allmost same problem.
I have a speedtouch 330, and when I load the firmware into the modem, it reboot, and then it keeps into standby mode (orange light, instead of regular green)
What may be causing this ?
-
I have the same problem with 3.3 released on 24/9/2003.
Does anybody if this problem has a solution now?
thanks
-
Junior Member
registered user
Originally Posted by
lorebett
I have the same problem with 3.3 released on 24/9/2003.
Does anybody if this problem has a solution now?
thanks
Same problems remain with the "New V3.3-2003-11-03 release" :
- own '.bashrc' overwritten by squelet '.bashrc'
- same errormessages when booting
- no www-connection possible with the Alcatel ADSL modem
Thanks for any hint or help!
Regards,
Georges.
-
it's the module speedtch which is causing problem
You have to type :
modprobe -r speedtch
before trying to connect, see http://david.abdelli.free.fr/speedtouch/en/index.html
(new version with a script) and http://60gp.ovh.net/~knoppixf/phpBB2...pic.php?t=3720
-
I am having troubles with this latest version of knoppix, i seem to be unable to connect to the internet. I have a Alcatel Speedtouch 330 modem. I've tried diferent forms of instaling it but unsucessfully. The closest i got to connecting was with david's script stated on battouta's post.
It does install my modem and syncronize my line for data transmission but it is unable to establish a connection. Someone tried to help me and said it could be a DNS problem, so i pinged at an IP instead of an URL but i got "network unreachable" confirming i was not connect.
I tried to see battouta's URL (http://60gp.ovh.net/~knoppixf/phpBB2...pic.php?t=3720) but i wasn't unable and it kept guiving me this message
"Forbidden
You don't have permission to access /~knoppixf/phpBB2/viewtopic.php on this server."
I really stuck in this one. Knoopix really looks good, but without a connection to the internet i can't really use it.
Can anyone help me please?
Ah, i must warn you i'm a linux newbie so try to make the explain a "connection for dummies" thing or sugest a script that does everything for me.
Thanks in advance and forguive me for my bad english.
Similar Threads
-
By baldyeti in forum News
Replies: 29
Last Post: 12-03-2003, 03:20 AM
-
By stevedperkins in forum General Support
Replies: 2
Last Post: 11-26-2003, 10:36 PM
-
Replies: 32
Last Post: 11-22-2003, 03:34 AM
-
Replies: 40
Last Post: 09-30-2003, 01:38 PM
-
Replies: 25
Last Post: 04-01-2003, 11:19 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Atari A8 800xl 65xe 130xe XEGS Pico Kit Fully Assembled Multicart A8Picocart
$29.00
ATARI MEGA/4 ST Computer. NOS In Box With All Accessories
$1500.00
Atari ST Grand Finally Software Bundle
$189.99
Atari 600XL/800XL Keyboard. New Membrane/Not Tested
$45.00
ATARI PORTFOLIO HPC-004 1989 Palmtop PC AS-IS For Parts
$45.00
Vintage Atari 1050 Floppy Disk Drive - No Power Cord - Nice Untested Condition
$38.95
Atari 1200XL Home Computer - Untested
$200.00
Atari 520 ST/STFM Vintage Computer
$180.00
Atari 2600 4 Switch Console in Box. See details.
$31.99
Vtg Atari 1050 Floppy Disk Drive 5.25” For Parts Only Incomplete Untested
$45.00