Results 1 to 4 of 4

Thread: Is it possible to switch to Debian Testing?

  1. #1

    Is it possible to switch to Debian Testing?

    Previously I tried a HD install followed by a downgrade to the Debian Stable version. This did not go very well (system was unusable).

    For reasons which I will not go into I CANNOT just do a install of Woody (Debian Stable).

    So I decided to use Knoppix due to its outstanding hardware detection (the main issue with Woody).

    Now as I understand Knoppix is basically a Tesing/Unstable version of Debian when installed on a HD.

    What I want to know is:

    Is it possible to set up apt so that it will only upgrade to the testing packages?

    I have the line:

    APT:efault-Release "Testing";

    in my /etc/apt/apt.conf

    I am happy with the way Knoppix is running now (with any unstable packages that are installed) but I want apt to overlook installing any further unstable packages but at the same time leaving the ones that are there alone (i.e.: no downgrade).

    I have also enabled the stable and testing sources in my apt sources list.

    My aim is to end up with a standard Debian Testing distro.

    Should this work?

    Thanks

    Mr_D

    P.S. I have read on debianhelp.org that people who have tried this method of installing a Debian distro encounter 'knoppixisms' in that some dependancies are made with Knoppix-Specific packages etc. Can anyone comment on what these effects are and how severe they are.

  2. #2
    Senior Member registered user
    Join Date
    Feb 2003
    Location
    Nova Scotia, Canada
    Posts
    2,479
    You can do what you want by commenting out the line(s) for unstable in your /etc/apt/sources.list. You would then apt-get update and upgrade when you upgrade it should tell you that it is going to remove all of KDE and may offer to install KDE 2.2.2 if not then just install the kde meta package later and you will have the 2.2.2 version.

  3. #3
    It's not just KDE I am concered about. KDE 3.0 is stable now. KDE 2.2.2 is old now and has been supersceded. Woody runs 3.0 (or 3.1) so I don't think it would install KDE 2.2.2.

  4. #4
    Senior Member registered user
    Join Date
    Feb 2003
    Location
    Nova Scotia, Canada
    Posts
    2,479
    Quote Originally Posted by mr_dellarenta
    It's not just KDE I am concered about. KDE 3.0 is stable now. KDE 2.2.2 is old now and has been supersceded. Woody runs 3.0 (or 3.1) so I don't think it would install KDE 2.2.2.
    If you look at where the programs come from then yes you will get 2.2.2 not KDE > 3.0 in testing.
    Code:
    [06:07 PM Mon Sep 29: stephen @ ~]
    >$ apt-cache policy kdebase
    kdebase:
      Installed: 4:3.1.3-1
      Candidate: 4:3.1.3-1
      Version Table:
     *** 4:3.1.3-1 0
            500 http://ftp.uk.debian.org unstable/main Packages
            100 /var/lib/dpkg/status
         4:2.2.2-14.7 0
            500 http://security.debian.org stable/updates/main Packages
         4:2.2.2-14 0
            500 http://ftp.uk.debian.org stable/main Packages
            990 http://ftp.uk.debian.org testing/main Packages

Similar Threads

  1. testing php code
    By maxIT in forum General Support
    Replies: 2
    Last Post: 05-16-2005, 08:13 PM
  2. WEP Penetration Testing
    By foamrotreturns in forum The Lounge
    Replies: 1
    Last Post: 04-01-2005, 11:44 PM
  3. Should I upgrade to Testing?
    By evilmrhenry in forum Hdd Install / Debian / Apt
    Replies: 1
    Last Post: 02-21-2004, 08:55 AM
  4. how to upgrade to debian testing kernel?
    By hyao in forum General Support
    Replies: 1
    Last Post: 08-01-2003, 03:40 PM
  5. Switch to Debian stable for KDE3.1?
    By robelanator in forum The Lounge
    Replies: 6
    Last Post: 04-18-2003, 01:35 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC picture

DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC

$50.00



Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric picture

Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric

$139.99



Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W picture

Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W

$399.00



Dell PowerEdge M620 Blade Server picture

Dell PowerEdge M620 Blade Server

$39.99



Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG picture

Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG

$69.99



2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD picture

2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD

$30.00



Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS picture

Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS

$103.99



HP ProLiant BL460C G7 Blade Server 2x Intel Xeon 3.06Ghz X5667 QLogic QMH2462 picture

HP ProLiant BL460C G7 Blade Server 2x Intel Xeon 3.06Ghz X5667 QLogic QMH2462

$28.95



Dell PowerEdge M620 Blade Server 2x E5-2670 2.6Ghz 16-Cores  256gb  2x 146gb 15k picture

Dell PowerEdge M620 Blade Server 2x E5-2670 2.6Ghz 16-Cores 256gb 2x 146gb 15k

$244.99



Dell Poweredge M630 Blade Server 2x E5-2680 v3 2.5ghz 24-Cores / 256gb / H730 picture

Dell Poweredge M630 Blade Server 2x E5-2680 v3 2.5ghz 24-Cores / 256gb / H730

$399.99