-
pbme scsi with lsi card
I get an error when launching knoppix 3.2 on a dell computer with a LSI scsi card :
* mptbase : ioc0 error : DoorBell ACK Timeout *
and then knoppix don't see my hd.
I have three of these Dell computers, same problem with the 3 one's.
Modules mptbase and mptscsi are supposed to be okay with kernels > 2.4.18 , and knoppix's one is 2.4.22...
thanks for your help!
-
Re: pbme scsi with lsi card
Hi,
I'm sorry to say that I have no solution so far, but what I can tell you is that: I have a DELL PC with the same scsi controller and I also get these error messages BUT nevertheless the kernel is finally able to boot. Here is a piece of my dmesg:
mptbase: Initiating ioc0 recovery
mptbase: ioc0: WARNING - IOC is in FAULT state!!!
FAULT code = 000eh
mptbase: ioc0: ERROR - Doorbell ACK timeout(40)!
mptbase: ioc0: Recovered from IOC FAULT
mptbase: Initiating ioc0 recovery
These messages occur about 4 times and then everthing just moves on as if the problem would not exist. A collegue of mine has the exact same PC (actually the PC's were ordered and shipped together so that they should definitely be the same in every detail) and he does not have this problem. We had a look at every BIOS revision of the board and the scsi controller but just everything is identical. I keep you posted as soon as I am aware of what's going on.
Wolfgang
Originally Posted by
niamor
I get an error when launching knoppix 3.2 on a dell computer with a LSI scsi card :
* mptbase : ioc0 error : DoorBell ACK Timeout *
and then knoppix don't see my hd.
I have three of these Dell computers, same problem with the 3 one's.
Modules mptbase and mptscsi are supposed to be okay with kernels > 2.4.18 , and knoppix's one is 2.4.22...
thanks for your help!
-
Re: pbme scsi with lsi card
Hi,
today I was inspired enough to try to find the problem again but with no success. Finally I opened up the PC and reassured that every scsi cable is properly in place. I did not find any cable that seems to be loose (as I mentioned in another post my kernel does not hang but needs several tries to get rid of the ioc0 error and therefor I did not expect any cable to be loose). I closed the PC again and rebooted and NOW THE PROBLEM IS NOT THERE ANYMORE. I rebooted about 10 times now and the problem is really gone! It seems to me as if one of the cables was not properly in place although it seems as if they were.
Wolfgang
Originally Posted by
niamor
I get an error when launching knoppix 3.2 on a dell computer with a LSI scsi card :
* mptbase : ioc0 error : DoorBell ACK Timeout *
and then knoppix don't see my hd.
I have three of these Dell computers, same problem with the 3 one's.
Modules mptbase and mptscsi are supposed to be okay with kernels > 2.4.18 , and knoppix's one is 2.4.22...
thanks for your help!
Similar Threads
-
By Phyrexia in forum General Support
Replies: 1
Last Post: 02-15-2005, 02:36 PM
-
By bh11111111 in forum Hardware & Booting
Replies: 0
Last Post: 01-24-2005, 06:43 PM
-
By geoffleach in forum Hardware & Booting
Replies: 0
Last Post: 12-04-2004, 10:02 PM
-
By 3133 in forum The Lounge
Replies: 2
Last Post: 10-12-2003, 03:27 PM
-
By rdasilva in forum Hardware & Booting
Replies: 13
Last Post: 05-24-2003, 02:57 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
IBM LSI SAS9220-8i M1015 46M0861 SAS/SATA PCI-e RAID Controller Both brackets
$139.00
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
Broadcom 9560-16I RAID Card SAS/SATA/NVME 8G cache SAS3916 PCIe 4.0 SFF8654
$813.95
Broadcom 9540-8i PCIe Gen4.0 X8 SAS 3808 RAID Card
$381.19
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$35.96
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5"/3.5" SATA HDD SSD
$142.49
Dell PCIe M.2 Boss S1 RAID Controller Card 7HYY4 with 2x 240GB SSD
$94.99