-
Knoppix 6.2.1 hd install
The problems I originally encountered with knoppix slow boot were caused by using a high write speed when moving the .iso to CD. Try halfing your write speed. After this the hd install went smooth. I am using and upgrading the install without problems. I am already utilizing Knoppix to the same extent I was utilizing XP. The apt-get update, and upgrade went smoothly as well, except Open Office upgrade. I love Knoppix with the swap space on reiserfs. I loaded a distro to and extended (ext) and it was like a turtle stuck in mud. As a newbie, i would discount the advise to not use the hd install of Knoppix (for other newbies). Learn command line, relax and work out your bugs.
-
Administrator
Site Admin-
Halving the speed may not be enough. I suggest 4x and absolutely never use more than 8x for CDs and 4x for DVDs. Higher speed burns always have problems, but the problems are usually hidden by the error correction code. From what I've seen I don't think Linux has error correction enabled during boot, thus you need a good clean error-free burn. And personally I want that error correction code to be able to help other discs over time recover from scratches and disc rot, so I always use low speed burns. At first I didn't want to believe this, but I learned the hard way when I couldn't recover stuff that I had burn "successfully" and verified at high speed years ago, now all of my burns are at low speed. It is well worth the few extra minutes to get a burn that will boot properly, or one that has a much better chance of surviving over time.
---
Verifying of md5 checksum and burning a CD at slow speed are important.
Similar Threads
-
By NetKatz in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 05-02-2004, 02:38 PM
-
By RNK in forum Customising & Remastering
Replies: 13
Last Post: 04-29-2004, 12:37 PM
-
By pierrevn in forum General Support
Replies: 5
Last Post: 12-12-2003, 07:34 AM
-
By Edix in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 11-10-2003, 08:20 PM
-
By kipizit in forum General Support
Replies: 1
Last Post: 11-07-2003, 03:08 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
IBM LSI SAS9220-8i M1015 46M0861 SAS/SATA PCI-e RAID Controller Both brackets
$139.00
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT
$59.00
HPE 869102-001 Smart Array E208i-a SR Gen10 Storage Controller RAID SP: 871039
$129.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$35.96
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5"/3.5" SATA HDD SSD
$142.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99