Running Knoppix from a boot USB stick:
My preference is not the default start mode (X) but at the plainest possible bash console.
By editing syslinux.cfg appropriately I've been able to manage this since about v.3!
For the moment in this version (v.9.1) this trick eludes me - I'll try again later.
So, I'm trying another pathway that has worked in the past.
In the root terminal in X (i.e. as root) type
$ init 1 <Enter>
and Hey Presto I am out of X, but still logged in as root, and at the plain bash console.
BUT: now the "init 1" request results in this message:
init: must be run as PID 1
and I am still in X.
So: please can anybody
(a) supply a tweaked syslinux.cfg that starts KNOPPIX in ultra-basic mode?
or (b) supply a workaround that will permit init 1 if started in X mode?
or (ideally) both??
Thank you.
SAS - HGST Ultrastar 7K4000 HUS724040ALA640 0F14688 3.5" 4TB 7.2K RPM 64MB HDD
$19.99
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
WD 4TB Gold Enterprise - 7200 RPM SATA 6Gb/s 128MB CACHE 3.5" HDD - WD4002FYYZ
$42.95
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
1TB HDD/SSD 2.5" SATA Hard Drive with Windows 10 or Windows 11 Pro Installed
$13.55
Seagate Exos X20 18TB SATA 6Gb/s 3.5" Enterprise Hard Drive - ST18000NM003D
$168.00
Hitachi 4TB 3.5" Hard Drive HUS724040ALE640 Ultrastar 7K4000 Internal 7.2K
$49.95
Western Digital Gold Enterprise 4TB,7200 RPM Internal Hard Disk Drive WD4002FYYZ
$39.95