Knoppix v.9.1 does not list my HD partitions
nvme01{p1,p2}
under /dev/; nor does it see them in fdisk -l.
They only become visible when viewed under File Manager; then they are mounted as
/media/knoppix/{quite complicated names}:
after which, they are listed as expected under /dev/ and shown in fdisk -l.
Is there something I am missing in the boot parameters?
The HD partitions show up as expected in v.8.6.1 without any special preparations.
(At the moment for several reasons v.8.6.1 is most definitely my version of choice.)
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
HPE 843201-001 SMART ARRAY P840ar/2GB 12Gb/s FBWC SAS RAID CONTROLLER BOARD
$345.60
HPE 848147-001 SMART ARRAY P840ar/2GB 12Gb/s FBWC SAS RAID CONTROLLER BOARD
$323.55
HPE 843199-B21 SMART ARRAY P840ar/2GB 12Gb/s FBWC SAS RAID CONTROLLER BOARD
$355.50
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$35.96
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Broadcom LSI 9305-16i SATA/SAS HBA Controller RAID Card
$225.00
Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5"/3.5" SATA HDD SSD
$142.49