Knoppix v.9.1 does not list my HD partitions
nvme01{p1,p2}
under /dev/; nor does it see them in fdisk -l.
They only become visible when viewed under File Manager; then they are mounted as
/media/knoppix/{quite complicated names}:
after which, they are listed as expected under /dev/ and shown in fdisk -l.
Is there something I am missing in the boot parameters?
The HD partitions show up as expected in v.8.6.1 without any special preparations.
(At the moment for several reasons v.8.6.1 is most definitely my version of choice.)
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$239.99
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
36TB SanDisk G-RAID 2 Thunderbolt 3 External Hard Drive - Excellent Condition
$630.00
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$15.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
9207-8i PCIE3.0 6Gbps HBA LSI FW:P20 IT Mode ZFS FreeNAS unRAID 2* SFF-8087 US
$32.88
Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 For 2.5" SATA HDD SSD UASP
$56.25
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$55.45