Knoppix v.9.1 does not list my HD partitions
nvme01{p1,p2}
under /dev/; nor does it see them in fdisk -l.
They only become visible when viewed under File Manager; then they are mounted as
/media/knoppix/{quite complicated names}:
after which, they are listed as expected under /dev/ and shown in fdisk -l.
Is there something I am missing in the boot parameters?
The HD partitions show up as expected in v.8.6.1 without any special preparations.
(At the moment for several reasons v.8.6.1 is most definitely my version of choice.)
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Intel PCIe SSD AIC RAID Controller Card G97168-252
$44.55
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
2 Bay RAID Hard Drive Enclosure USB 3.0 Type-B for 2.5" SATA SSD/HDD Enclosure
$59.99