Knoppix v.9.1 does not list my HD partitions
nvme01{p1,p2}
under /dev/; nor does it see them in fdisk -l.
They only become visible when viewed under File Manager; then they are mounted as
/media/knoppix/{quite complicated names}:
after which, they are listed as expected under /dev/ and shown in fdisk -l.
Is there something I am missing in the boot parameters?
The HD partitions show up as expected in v.8.6.1 without any special preparations.
(At the moment for several reasons v.8.6.1 is most definitely my version of choice.)
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$179.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$55.45
Dell 7H4CN PERC H730P Raid Controller Mini Mono12GBPS 2GB NV Cache
$44.99
Dell KMCCD PERC H730 MINI MONO 1GB RAID CONTROLLER W/Battery
$26.99
Dell PowerEdge PERC H730P 2GB 12Gbps SAS SATA Mini RAID Controller Battery 7H4CN
$22.50
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 04Y5H1 High Profile
$13.99
Yottamaster 2 Bay USB 3.1 RAID Hard Drive Enclosure For 2.5" SATA HDD SSD UASP
$59.99
OWC ThunderBay 4 RAID 5 with Dual Thunderbolt 3 Ports No HDDs Included
$350.00