Results 1 to 1 of 1

Thread: Samba and older windows systems

  1. #1
    Member registered user
    Join Date
    Apr 2007
    Posts
    93

    Samba and older windows systems

    I still like to use my older systems, and I want to access some smb shares and vice versa.

    Now remember that older systems are a "security risk" and I don't have these connected to the internet.

    Older versions of samba and knoppix have changed the minimum protocol levels which is why older versions of knoppix work with older systems and knoppix 9.1 doesn't.

    One handy command is

    "findsmb"

    which should list any SMB servers on your network.

    ==================================

    To connect to my old windows 2000 box with smbclient, I have to edit the smb.conf file and set

    "sudo nano /etc/samba/smb.conf"

    "client min protocol = NT1"
    "client use spnego = no"

    because smbclient gets its settings from smb.conf.

    So now I can go

    smbclient -L 192.168.0.1

    and it lists my available shares without problem.

    smbclient -L 192.168.0.1 -d 9

    will give you lots of debugging information.

    =============================

    To mount a cifs/samba share, you can do:

    sudo mkdir /mnt/a
    sudo chown knoppix:knoppix /mnt/a
    mount.cifs //192.168.0.1/share_name /mnt/a -o user=username,pass=password,uid=knoppix

    but an older windows system like win2000 uses older authentication (remember that's insecure) so we have to step down the security with:

    mount.cifs //192.168.0.1/share_name /mnt/a -o user=username,pass=password,uid=knoppix,sec=ntlmv2 ,vers=1.0

    Note that mount.cifs doesn't get its settings from smb.conf, so you specify the security as "sec" and "vers" options on the command line.

    ================================

    Making your own samba share:

    "sudo nano /etc/samba/smb.conf"

    and add your own share at the bottom of the file

    [my_share_sdb]
    path = /media/sdb1/
    read only = yes

    # set read only to yes or no depending on if you want to write it

    ======

    Set the min protocol to "NT1" if you want an older system to be able to connect (remember it's insecure)
    Note that this has to go in the global section

    min protocol = NT1

    #(min protocol is a synonym for "server min protocol")
    =====================

    another thing you can do is to set the netbios name in the smb.conf, so if you don't want the default Microknoppix name you can set it:

    netbios name = KNOPPIX2

    or even set aliases

    netbios aliases = ALIAS1 ALIAS2


    This can prove useful if you have multiple knoppix systems on your network and you don't want them all to have the name Microknoppix.
    ===================

    sudo smbpasswd -a knoppix

    will add a user to the smb password file and prompt you for the password

    you can do

    echo -e 'SMB\nSMB' | sudo smbpasswd -a knoppix

    if you want to set your smb password for user knoppix to SMB.

    =======================

    Okay, once you've fixed up your smb.conf file you need to launch your samba service

    smbd is the samba demon, nmbd does the netbios stuff (you need them both)

    sudo service smbd start
    sudo service nmbd start

    and if you change the settings in smb.conf you need to restart smbd (or nmbd if you change the netbios settings)

    sudo service smbd restart
    sudo service nmbd restart

    ==================

    Also you have the "testparm" command to check your samba smb.conf file.
    "testparm -v" for verbose.



    Lots of good information on samba at:


    https://www.samba.org/samba/docs/current/man-html/smb.conf.5.html#SERVERMAXPROTOCOL
    https://www.samba.org/samba/docs/current/man-html/smb.conf.5.html#CLIENTMAXPROTOCOL


    • CORE: Earliest version. No concept of user names.
    • COREPLUS: Slight improvements on CORE for efficiency.
    • LANMAN1: First modern version of the protocol. Long filename support.
    • LANMAN2: Updates to Lanman1 protocol.
    • NT1: Current up to date version of the protocol. Used by Windows NT. Known as CIFS.
    • SMB2: Re-implementation of the SMB protocol. Used by Windows Vista and later versions of Windows. SMB2 has sub protocols available.

      • SMB2_02: The earliest SMB2 version.
      • SMB2_10: Windows 7 SMB2 version.


      By default SMB2 selects the SMB2_10 variant.
    • SMB3: The same as SMB2. Used by Windows 8. SMB3 has sub protocols available.

      • SMB3_00: Windows 8 SMB3 version.
      • SMB3_02: Windows 8.1 SMB3 version.
      • SMB3_11: Windows 10 SMB3 version.


      By default SMB3 selects the SMB3_11 variant.
    Last edited by don999; 11-29-2021 at 05:03 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT picture

XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT

$59.00



IBM LSI SAS9220-8i M1015 46M0861 SAS/SATA PCI-e RAID Controller Both brackets picture

IBM LSI SAS9220-8i M1015 46M0861 SAS/SATA PCI-e RAID Controller Both brackets

$139.00



LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA picture

LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA

$229.99



Lot of 4 - Genuine Dell (62P9H) PERC H710 512MB Mini Blade 6Gbps SAS Raid picture

Lot of 4 - Genuine Dell (62P9H) PERC H710 512MB Mini Blade 6Gbps SAS Raid

$49.99



Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE picture

Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE

$15.98



ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs picture

ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs

$86.99



LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License picture

LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License

$35.96



LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault picture

LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault

$39.00



ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID picture

ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID

$58.99



Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5

Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5"/3.5" SATA HDD SSD

$142.49