Results 1 to 1 of 1

Thread: Samba and older windows systems

  1. #1
    Member registered user
    Join Date
    Apr 2007
    Posts
    92

    Samba and older windows systems

    I still like to use my older systems, and I want to access some smb shares and vice versa.

    Now remember that older systems are a "security risk" and I don't have these connected to the internet.

    Older versions of samba and knoppix have changed the minimum protocol levels which is why older versions of knoppix work with older systems and knoppix 9.1 doesn't.

    One handy command is

    "findsmb"

    which should list any SMB servers on your network.

    ==================================

    To connect to my old windows 2000 box with smbclient, I have to edit the smb.conf file and set

    "sudo nano /etc/samba/smb.conf"

    "client min protocol = NT1"
    "client use spnego = no"

    because smbclient gets its settings from smb.conf.

    So now I can go

    smbclient -L 192.168.0.1

    and it lists my available shares without problem.

    smbclient -L 192.168.0.1 -d 9

    will give you lots of debugging information.

    =============================

    To mount a cifs/samba share, you can do:

    sudo mkdir /mnt/a
    sudo chown knoppix:knoppix /mnt/a
    mount.cifs //192.168.0.1/share_name /mnt/a -o user=username,pass=password,uid=knoppix

    but an older windows system like win2000 uses older authentication (remember that's insecure) so we have to step down the security with:

    mount.cifs //192.168.0.1/share_name /mnt/a -o user=username,pass=password,uid=knoppix,sec=ntlmv2 ,vers=1.0

    Note that mount.cifs doesn't get its settings from smb.conf, so you specify the security as "sec" and "vers" options on the command line.

    ================================

    Making your own samba share:

    "sudo nano /etc/samba/smb.conf"

    and add your own share at the bottom of the file

    [my_share_sdb]
    path = /media/sdb1/
    read only = yes

    # set read only to yes or no depending on if you want to write it

    ======

    Set the min protocol to "NT1" if you want an older system to be able to connect (remember it's insecure)
    Note that this has to go in the global section

    min protocol = NT1

    #(min protocol is a synonym for "server min protocol")
    =====================

    another thing you can do is to set the netbios name in the smb.conf, so if you don't want the default Microknoppix name you can set it:

    netbios name = KNOPPIX2

    or even set aliases

    netbios aliases = ALIAS1 ALIAS2


    This can prove useful if you have multiple knoppix systems on your network and you don't want them all to have the name Microknoppix.
    ===================

    sudo smbpasswd -a knoppix

    will add a user to the smb password file and prompt you for the password

    you can do

    echo -e 'SMB\nSMB' | sudo smbpasswd -a knoppix

    if you want to set your smb password for user knoppix to SMB.

    =======================

    Okay, once you've fixed up your smb.conf file you need to launch your samba service

    smbd is the samba demon, nmbd does the netbios stuff (you need them both)

    sudo service smbd start
    sudo service nmbd start

    and if you change the settings in smb.conf you need to restart smbd (or nmbd if you change the netbios settings)

    sudo service smbd restart
    sudo service nmbd restart

    ==================

    Also you have the "testparm" command to check your samba smb.conf file.
    "testparm -v" for verbose.



    Lots of good information on samba at:


    https://www.samba.org/samba/docs/current/man-html/smb.conf.5.html#SERVERMAXPROTOCOL
    https://www.samba.org/samba/docs/current/man-html/smb.conf.5.html#CLIENTMAXPROTOCOL


    • CORE: Earliest version. No concept of user names.
    • COREPLUS: Slight improvements on CORE for efficiency.
    • LANMAN1: First modern version of the protocol. Long filename support.
    • LANMAN2: Updates to Lanman1 protocol.
    • NT1: Current up to date version of the protocol. Used by Windows NT. Known as CIFS.
    • SMB2: Re-implementation of the SMB protocol. Used by Windows Vista and later versions of Windows. SMB2 has sub protocols available.

      • SMB2_02: The earliest SMB2 version.
      • SMB2_10: Windows 7 SMB2 version.


      By default SMB2 selects the SMB2_10 variant.
    • SMB3: The same as SMB2. Used by Windows 8. SMB3 has sub protocols available.

      • SMB3_00: Windows 8 SMB3 version.
      • SMB3_02: Windows 8.1 SMB3 version.
      • SMB3_11: Windows 10 SMB3 version.


      By default SMB3 selects the SMB3_11 variant.
    Last edited by don999; 11-29-2021 at 05:03 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge R420 1U Server w/ 2x E5-2430, 48GB RAM, PERC H310 Mini picture

Dell PowerEdge R420 1U Server w/ 2x E5-2430, 48GB RAM, PERC H310 Mini

$69.99



Dell EMC PowerEdge R540 Server Gold 5118 2.3GHz 32gb 8-bay LFF H730P 2x PSU picture

Dell EMC PowerEdge R540 Server Gold 5118 2.3GHz 32gb 8-bay LFF H730P 2x PSU

$657.00



Dell R730 w/ 2x E5-2650v3 10c, 192GB (12x16GB) RAM, H730 Mini, 2x 750W PSU picture

Dell R730 w/ 2x E5-2650v3 10c, 192GB (12x16GB) RAM, H730 Mini, 2x 750W PSU

$499.99



H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W picture

H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W

$2512.18



SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount picture

SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount

$179.99



Dell Poweredge R630 2x Xeon E5-2660 v3 2.6ghz 20-Cores / 32gb / H730 / iDracEnt picture

Dell Poweredge R630 2x Xeon E5-2660 v3 2.6ghz 20-Cores / 32gb / H730 / iDracEnt

$282.92



Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB picture

Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB

$510.00



Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD picture

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD

$389.99



HP Proliant DL380 G9 2x E5-2680 v4 2.4Ghz 28-Cores 32GB P440ar 2x 300gb 2x 750w picture

HP Proliant DL380 G9 2x E5-2680 v4 2.4Ghz 28-Cores 32GB P440ar 2x 300gb 2x 750w

$139.99



CTO Dell PowerEdge R630 Server, 2x Xeon E5-2680V4, 64GB- 512GB RAM, New 960G SSD picture

CTO Dell PowerEdge R630 Server, 2x Xeon E5-2680V4, 64GB- 512GB RAM, New 960G SSD

$340.00