Results 1 to 1 of 1

Thread: Samba and older windows systems

  1. #1
    Member registered user
    Join Date
    Apr 2007
    Posts
    94

    Samba and older windows systems

    I still like to use my older systems, and I want to access some smb shares and vice versa.

    Now remember that older systems are a "security risk" and I don't have these connected to the internet.

    Older versions of samba and knoppix have changed the minimum protocol levels which is why older versions of knoppix work with older systems and knoppix 9.1 doesn't.

    One handy command is

    "findsmb"

    which should list any SMB servers on your network.

    ==================================

    To connect to my old windows 2000 box with smbclient, I have to edit the smb.conf file and set

    "sudo nano /etc/samba/smb.conf"

    "client min protocol = NT1"
    "client use spnego = no"

    because smbclient gets its settings from smb.conf.

    So now I can go

    smbclient -L 192.168.0.1

    and it lists my available shares without problem.

    smbclient -L 192.168.0.1 -d 9

    will give you lots of debugging information.

    =============================

    To mount a cifs/samba share, you can do:

    sudo mkdir /mnt/a
    sudo chown knoppix:knoppix /mnt/a
    mount.cifs //192.168.0.1/share_name /mnt/a -o user=username,pass=password,uid=knoppix

    but an older windows system like win2000 uses older authentication (remember that's insecure) so we have to step down the security with:

    mount.cifs //192.168.0.1/share_name /mnt/a -o user=username,pass=password,uid=knoppix,sec=ntlmv2 ,vers=1.0

    Note that mount.cifs doesn't get its settings from smb.conf, so you specify the security as "sec" and "vers" options on the command line.

    ================================

    Making your own samba share:

    "sudo nano /etc/samba/smb.conf"

    and add your own share at the bottom of the file

    [my_share_sdb]
    path = /media/sdb1/
    read only = yes

    # set read only to yes or no depending on if you want to write it

    ======

    Set the min protocol to "NT1" if you want an older system to be able to connect (remember it's insecure)
    Note that this has to go in the global section

    min protocol = NT1

    #(min protocol is a synonym for "server min protocol")
    =====================

    another thing you can do is to set the netbios name in the smb.conf, so if you don't want the default Microknoppix name you can set it:

    netbios name = KNOPPIX2

    or even set aliases

    netbios aliases = ALIAS1 ALIAS2


    This can prove useful if you have multiple knoppix systems on your network and you don't want them all to have the name Microknoppix.
    ===================

    sudo smbpasswd -a knoppix

    will add a user to the smb password file and prompt you for the password

    you can do

    echo -e 'SMB\nSMB' | sudo smbpasswd -a knoppix

    if you want to set your smb password for user knoppix to SMB.

    =======================

    Okay, once you've fixed up your smb.conf file you need to launch your samba service

    smbd is the samba demon, nmbd does the netbios stuff (you need them both)

    sudo service smbd start
    sudo service nmbd start

    and if you change the settings in smb.conf you need to restart smbd (or nmbd if you change the netbios settings)

    sudo service smbd restart
    sudo service nmbd restart

    ==================

    Also you have the "testparm" command to check your samba smb.conf file.
    "testparm -v" for verbose.



    Lots of good information on samba at:


    https://www.samba.org/samba/docs/current/man-html/smb.conf.5.html#SERVERMAXPROTOCOL
    https://www.samba.org/samba/docs/current/man-html/smb.conf.5.html#CLIENTMAXPROTOCOL


    • CORE: Earliest version. No concept of user names.
    • COREPLUS: Slight improvements on CORE for efficiency.
    • LANMAN1: First modern version of the protocol. Long filename support.
    • LANMAN2: Updates to Lanman1 protocol.
    • NT1: Current up to date version of the protocol. Used by Windows NT. Known as CIFS.
    • SMB2: Re-implementation of the SMB protocol. Used by Windows Vista and later versions of Windows. SMB2 has sub protocols available.

      • SMB2_02: The earliest SMB2 version.
      • SMB2_10: Windows 7 SMB2 version.


      By default SMB2 selects the SMB2_10 variant.
    • SMB3: The same as SMB2. Used by Windows 8. SMB3 has sub protocols available.

      • SMB3_00: Windows 8 SMB3 version.
      • SMB3_02: Windows 8.1 SMB3 version.
      • SMB3_11: Windows 10 SMB3 version.


      By default SMB3 selects the SMB3_11 variant.
    Last edited by don999; 11-29-2021 at 05:03 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge R430 3.5 1U 2x E5-2666 v3 2.9ghz 20-Cores 64gb 4x Trays 2x 550w picture

Dell PowerEdge R430 3.5 1U 2x E5-2666 v3 2.9ghz 20-Cores 64gb 4x Trays 2x 550w

$219.99



Supermicro 6028R-E1CR24N 24x LFF- Wholesale Build Your Own Storage Server picture

Supermicro 6028R-E1CR24N 24x LFF- Wholesale Build Your Own Storage Server

$249.99



Dell R640 8x 2.5

Dell R640 8x 2.5" SFF Server iDRAC ENT - Wholesale Custom Build Your Server

$269.99



Dell Poweredge R730 8LFF 2x E5-2690 v3 2.6ghz  64gb  H730  8x 3.5 Trays  2x 750w picture

Dell Poweredge R730 8LFF 2x E5-2690 v3 2.6ghz 64gb H730 8x 3.5 Trays 2x 750w

$364.99



Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330 picture

Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330

$189.65



HP ProLiant DL360 G9 Server 2x E5-2690v3 2.60Ghz 24-Core 256GB P440ar picture

HP ProLiant DL360 G9 Server 2x E5-2690v3 2.60Ghz 24-Core 256GB P440ar

$299.55



SuperMicro 6018U-TR4T X10DRU-I+ 4-Bay 2x E5-2630v4 32GB RAM 1U Server picture

SuperMicro 6018U-TR4T X10DRU-I+ 4-Bay 2x E5-2630v4 32GB RAM 1U Server

$168.00



New Open Box 867959-B21 HP DL360 GEN10 8SFF CTO SERVER picture

New Open Box 867959-B21 HP DL360 GEN10 8SFF CTO SERVER

$395.00



Lenovo ThinkServer TS460 Part Number: 70TS-S01U00 picture

Lenovo ThinkServer TS460 Part Number: 70TS-S01U00

$150.00



Dell PowerEdge FX2S Server Chassis XHNMX Switched Rackmount 8-Bay Unit picture

Dell PowerEdge FX2S Server Chassis XHNMX Switched Rackmount 8-Bay Unit

$279.99