Results 1 to 1 of 1

Thread: Samba and older windows systems

  1. #1
    Member registered user
    Join Date
    Apr 2007
    Posts
    79

    Samba and older windows systems

    I still like to use my older systems, and I want to access some smb shares and vice versa.

    Now remember that older systems are a "security risk" and I don't have these connected to the internet.

    Older versions of samba and knoppix have changed the minimum protocol levels which is why older versions of knoppix work with older systems and knoppix 9.1 doesn't.

    One handy command is

    "findsmb"

    which should list any SMB servers on your network.

    ==================================

    To connect to my old windows 2000 box with smbclient, I have to edit the smb.conf file and set

    "sudo nano /etc/samba/smb.conf"

    "client min protocol = NT1"
    "client use spnego = no"

    because smbclient gets its settings from smb.conf.

    So now I can go

    smbclient -L 192.168.0.1

    and it lists my available shares without problem.

    smbclient -L 192.168.0.1 -d 9

    will give you lots of debugging information.

    =============================

    To mount a cifs/samba share, you can do:

    sudo mkdir /mnt/a
    sudo chown knoppix:knoppix /mnt/a
    mount.cifs //192.168.0.1/share_name /mnt/a -o user=username,pass=password,uid=knoppix

    but an older windows system like win2000 uses older authentication (remember that's insecure) so we have to step down the security with:

    mount.cifs //192.168.0.1/share_name /mnt/a -o user=username,pass=password,uid=knoppix,sec=ntlmv2 ,vers=1.0

    Note that mount.cifs doesn't get its settings from smb.conf, so you specify the security as "sec" and "vers" options on the command line.

    ================================

    Making your own samba share:

    "sudo nano /etc/samba/smb.conf"

    and add your own share at the bottom of the file

    [my_share_sdb]
    path = /media/sdb1/
    read only = yes

    # set read only to yes or no depending on if you want to write it

    ======

    Set the min protocol to "NT1" if you want an older system to be able to connect (remember it's insecure)
    Note that this has to go in the global section

    min protocol = NT1

    #(min protocol is a synonym for "server min protocol")
    =====================

    another thing you can do is to set the netbios name in the smb.conf, so if you don't want the default Microknoppix name you can set it:

    netbios name = KNOPPIX2

    or even set aliases

    netbios aliases = ALIAS1 ALIAS2


    This can prove useful if you have multiple knoppix systems on your network and you don't want them all to have the name Microknoppix.
    ===================

    sudo smbpasswd -a knoppix

    will add a user to the smb password file and prompt you for the password

    you can do

    echo -e 'SMB\nSMB' | sudo smbpasswd -a knoppix

    if you want to set your smb password for user knoppix to SMB.

    =======================

    Okay, once you've fixed up your smb.conf file you need to launch your samba service

    smbd is the samba demon, nmbd does the netbios stuff (you need them both)

    sudo service smbd start
    sudo service nmbd start

    and if you change the settings in smb.conf you need to restart smbd (or nmbd if you change the netbios settings)

    sudo service smbd restart
    sudo service nmbd restart

    ==================

    Also you have the "testparm" command to check your samba smb.conf file.
    "testparm -v" for verbose.



    Lots of good information on samba at:


    https://www.samba.org/samba/docs/current/man-html/smb.conf.5.html#SERVERMAXPROTOCOL
    https://www.samba.org/samba/docs/current/man-html/smb.conf.5.html#CLIENTMAXPROTOCOL


    • CORE: Earliest version. No concept of user names.
    • COREPLUS: Slight improvements on CORE for efficiency.
    • LANMAN1: First modern version of the protocol. Long filename support.
    • LANMAN2: Updates to Lanman1 protocol.
    • NT1: Current up to date version of the protocol. Used by Windows NT. Known as CIFS.
    • SMB2: Re-implementation of the SMB protocol. Used by Windows Vista and later versions of Windows. SMB2 has sub protocols available.

      • SMB2_02: The earliest SMB2 version.
      • SMB2_10: Windows 7 SMB2 version.


      By default SMB2 selects the SMB2_10 variant.
    • SMB3: The same as SMB2. Used by Windows 8. SMB3 has sub protocols available.

      • SMB3_00: Windows 8 SMB3 version.
      • SMB3_02: Windows 8.1 SMB3 version.
      • SMB3_11: Windows 10 SMB3 version.


      By default SMB3 selects the SMB3_11 variant.
    Last edited by don999; 11-29-2021 at 05:03 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


IBM System Z9 BC (2096) Mainframe Server picture

IBM System Z9 BC (2096) Mainframe Server

$500.00



OEM IBM server RAM 5gb PC2-5300F picture

OEM IBM server RAM 5gb PC2-5300F

$20.00



3TB 3.5 seagate ST3000nm0043 SAS 7200RPM 128MB 6GB/s HDD hard drive for servers  picture

3TB 3.5 seagate ST3000nm0043 SAS 7200RPM 128MB 6GB/s HDD hard drive for servers

$23.39



Hitachi / IBM 3.5

Hitachi / IBM 3.5" 6TB SAS / SATA 7.2K 6Gbps - 12Gbps 64MB - 128MB Hard Drive

$44.10



IBM System x3650 M4 Server Dual XEON (R) 2.6 GHz 28GB RAM 4.3T Storage picture

IBM System x3650 M4 Server Dual XEON (R) 2.6 GHz 28GB RAM 4.3T Storage

$250.00



IBM System x3650 Server Dual Xeon E5160, 3GB Ram picture

IBM System x3650 Server Dual Xeon E5160, 3GB Ram

$80.00



IBM System x3650M3 Server Dual E5640 4 Core 2.67GHZ 96GB DDR3 1x 250GB SATA picture

IBM System x3650M3 Server Dual E5640 4 Core 2.67GHZ 96GB DDR3 1x 250GB SATA

$174.95



IBM 7143-AC1 Server X3850 X5 /4 XEON  E7-8870 2.40 GHz 40 Cores /NO RAM picture

IBM 7143-AC1 Server X3850 X5 /4 XEON E7-8870 2.40 GHz 40 Cores /NO RAM

$400.00



IBM Power 7 Express Server 8233-E8B 3x 74Y2380 3.0GHZ 8-Core CPU 74Y2457 192GB picture

IBM Power 7 Express Server 8233-E8B 3x 74Y2380 3.0GHZ 8-Core CPU 74Y2457 192GB

$999.95



IBM eServer p5 9111-520 8-Bay 1.65GHZ 2-Way Power5 8GB Server System No Caddy picture

IBM eServer p5 9111-520 8-Bay 1.65GHZ 2-Way Power5 8GB Server System No Caddy

$199.99