Knoppix v.9.1 does not list my HD partitions
nvme01{p1,p2}
under /dev/; nor does it see them in fdisk -l.
They only become visible when viewed under File Manager; then they are mounted as
/media/knoppix/{quite complicated names}:
after which, they are listed as expected under /dev/ and shown in fdisk -l.
Is there something I am missing in the boot parameters?
The HD partitions show up as expected in v.8.6.1 without any special preparations.
(At the moment for several reasons v.8.6.1 is most definitely my version of choice.)
IBM AC1 7946 w/ 2x Intel Xeon E5504 CPU's @ 2.0GHz, 8GB RAM, No HDD or OS
$75.00
3TB 3.5 seagate ST3000nm0043 SAS 7200RPM 128MB 6GB/s HDD hard drive for servers
$23.39
IBM System Z9 BC (2096) Mainframe Server
$500.00
IBM System x3650M3 Server Dual E5640 4 Core 2.67GHZ 96GB DDR3 1x 250GB SATA
$174.95
MBI System X3550 M4 Server intel 2x E5-2620V2, 2.10GHz, 32GB Ram, (8x4GB)
$42.99
IBM System x3650 Server Dual Xeon E5160, 3GB Ram
$80.00
IBM Broadcom NetXtreme 5719 1GB 4 Port Ethernet Server Adapter 74Y4064 Tested
$14.95
IBM 7995-AC1 HS21 BLADE SERVER 0 X 0
$39.99
IBM eServer p5 9111-520 8-Bay 1.65GHZ 2-Way Power5 8GB Server System No Caddy
$199.99
IBM Power 720 8202-E4B Power 7 4-Core 3.0GHz 8GB SAS Server System No Caddy/HDD
$299.99