Results 1 to 2 of 2

Thread: knoppix 5.1.1 live cd stops (can't find knoppix file system)

  1. #1
    Member registered user
    Join Date
    Jul 2007
    Posts
    32

    knoppix 5.1.1 live cd stops (can't find knoppix file system)

    I posted in laptops, but I'm getting no bites and hopefully someone here has some technical knowledge and can provide some help.

    I'm trying to load Knoppix 5.1.1 live CD on a laptop (Toshiba S11). It works on the older S10 I have. I've tried lots options to no avail.
    So I popped in Knoppix 6.2.1 live CD and it booted up, it found knoppix 6 on /dev/sr0. So I went back to 5.1.1 just after searching for firewire/usb devices it starts to look for knoppix in sda1 and a bunch of others, it moved to fast I couldn't see. Then I get the "Can't find knoppix file system" error and it stops dead at a #knoppix prompt.

    If I type exit, it displays some more possible useful information "unable to mount file system." So I think it might have something to do with the controller? I've heard some SATA controllers weren't supported with older linux kernels? The kernel in knoppix 5.1.1 is version 2.6.19 if that helps. Maybe I should remaster a knoppix 5.1.1 with the same kernel in 6.2.1 and see if that works? I'm not sure, that's out of my expertise right now. The simplest way is hopefully able to find a combination setting so that it will be able to read the CD.

    I though maybe setting home=/dev/sr0 would work since that's where knoppix 6.2.1 was found. Maybe I need to add something more to make it work or maybe I'm going down some rabbit hole.

    Any help would be appreciated.

  2. #2
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    Hi Chris2222

    I suggest you run hwinfo or lspci in order to find the vendor id and the product id of your SATA or IDE controller connected to your CDROM. Then you can try to find out if there was any kernel driver for your hardware in Linux 2.6. If there is a driver for a later Linux 2.6 kernel you could consider to remaster Knoppix 5.1.1 with that kernel.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module picture

SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module

$8.90



Cisco 1.25Gb 500m 850nm 1000Base-SX SFP Transceiver GLC-SX-MM picture

Cisco 1.25Gb 500m 850nm 1000Base-SX SFP Transceiver GLC-SX-MM

$2.94



For Cisco SFP-10G-SR 10GBase-SR 10G SFP+ Transceiver multimode SFP 850nm 300 M picture

For Cisco SFP-10G-SR 10GBase-SR 10G SFP+ Transceiver multimode SFP 850nm 300 M

$25.99



GENUINE Cisco SFP-10G-SR V03 10-2415-03 Transceiver Module  picture

GENUINE Cisco SFP-10G-SR V03 10-2415-03 Transceiver Module

$8.90



HP 1Gb SFP RJ-45 Module 453156-001 picture

HP 1Gb SFP RJ-45 Module 453156-001

$3.00



Cisco SFP-10G-SR 10-2415-03 SFP Transceiver picture

Cisco SFP-10G-SR 10-2415-03 SFP Transceiver

$7.98



Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver picture

Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver

$7.70



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.90



SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module picture

SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module

$7.48



Genuine Cisco GLC-SX-MMD 1000Base-SX SFP Transceiver Module picture

Genuine Cisco GLC-SX-MMD 1000Base-SX SFP Transceiver Module

$7.90