Results 1 to 2 of 2

Thread: knoppix 5.1.1 live cd stops (can't find knoppix file system)

  1. #1
    Member registered user
    Join Date
    Jul 2007
    Posts
    32

    knoppix 5.1.1 live cd stops (can't find knoppix file system)

    I posted in laptops, but I'm getting no bites and hopefully someone here has some technical knowledge and can provide some help.

    I'm trying to load Knoppix 5.1.1 live CD on a laptop (Toshiba S11). It works on the older S10 I have. I've tried lots options to no avail.
    So I popped in Knoppix 6.2.1 live CD and it booted up, it found knoppix 6 on /dev/sr0. So I went back to 5.1.1 just after searching for firewire/usb devices it starts to look for knoppix in sda1 and a bunch of others, it moved to fast I couldn't see. Then I get the "Can't find knoppix file system" error and it stops dead at a #knoppix prompt.

    If I type exit, it displays some more possible useful information "unable to mount file system." So I think it might have something to do with the controller? I've heard some SATA controllers weren't supported with older linux kernels? The kernel in knoppix 5.1.1 is version 2.6.19 if that helps. Maybe I should remaster a knoppix 5.1.1 with the same kernel in 6.2.1 and see if that works? I'm not sure, that's out of my expertise right now. The simplest way is hopefully able to find a combination setting so that it will be able to read the CD.

    I though maybe setting home=/dev/sr0 would work since that's where knoppix 6.2.1 was found. Maybe I need to add something more to make it work or maybe I'm going down some rabbit hole.

    Any help would be appreciated.

  2. #2
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    Hi Chris2222

    I suggest you run hwinfo or lspci in order to find the vendor id and the product id of your SATA or IDE controller connected to your CDROM. Then you can try to find out if there was any kernel driver for your hardware in Linux 2.6. If there is a driver for a later Linux 2.6 kernel you could consider to remaster Knoppix 5.1.1 with that kernel.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


For Cisco SFP-GE-T, Ubiquti Transceiver 1G SFP-T 1000BASE-T Copper SFP to RJ45 picture

For Cisco SFP-GE-T, Ubiquti Transceiver 1G SFP-T 1000BASE-T Copper SFP to RJ45

$170.99



NEW Sealed Original Cisco SFP-10G-SR 10G SR SFP+ Module 850nmMM *US Shipping* picture

NEW Sealed Original Cisco SFP-10G-SR 10G SR SFP+ Module 850nmMM *US Shipping*

$18.00



SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module picture

SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module

$6.90



Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver picture

Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver

$7.70



Cisco GLC-T 1000Base-T SFP Transceiver Module RJ-45  picture

Cisco GLC-T 1000Base-T SFP Transceiver Module RJ-45

$24.99



Cisco SFP-10G-SR V03 10-2415-03 10GBASE Multimode Fiber Optic Transceiver Module picture

Cisco SFP-10G-SR V03 10-2415-03 10GBASE Multimode Fiber Optic Transceiver Module

$6.98



10GBase-T SFP+ to RJ45 Copper Transceiver SFP Module for Cisco SFP-10G-T-S 10Gb picture

10GBase-T SFP+ to RJ45 Copper Transceiver SFP Module for Cisco SFP-10G-T-S 10Gb

$55.99



Cisco GLC-TE 1000BASE-T SFP Copper RJ-45 100m - 01478  picture

Cisco GLC-TE 1000BASE-T SFP Copper RJ-45 100m - 01478

$24.99



HP Aruba J9150D 10GBASE-SR SFP+ Transceiver Module 850nm 300m MMF LC picture

HP Aruba J9150D 10GBASE-SR SFP+ Transceiver Module 850nm 300m MMF LC

$65.00



Dell PowerConnect M8024-K 10GB Switch Module (07WKF9) picture

Dell PowerConnect M8024-K 10GB Switch Module (07WKF9)

$135.00