Results 1 to 2 of 2

Thread: knoppix 5.1.1 live cd stops (can't find knoppix file system)

  1. #1
    Member registered user
    Join Date
    Jul 2007
    Posts
    32

    knoppix 5.1.1 live cd stops (can't find knoppix file system)

    I posted in laptops, but I'm getting no bites and hopefully someone here has some technical knowledge and can provide some help.

    I'm trying to load Knoppix 5.1.1 live CD on a laptop (Toshiba S11). It works on the older S10 I have. I've tried lots options to no avail.
    So I popped in Knoppix 6.2.1 live CD and it booted up, it found knoppix 6 on /dev/sr0. So I went back to 5.1.1 just after searching for firewire/usb devices it starts to look for knoppix in sda1 and a bunch of others, it moved to fast I couldn't see. Then I get the "Can't find knoppix file system" error and it stops dead at a #knoppix prompt.

    If I type exit, it displays some more possible useful information "unable to mount file system." So I think it might have something to do with the controller? I've heard some SATA controllers weren't supported with older linux kernels? The kernel in knoppix 5.1.1 is version 2.6.19 if that helps. Maybe I should remaster a knoppix 5.1.1 with the same kernel in 6.2.1 and see if that works? I'm not sure, that's out of my expertise right now. The simplest way is hopefully able to find a combination setting so that it will be able to read the CD.

    I though maybe setting home=/dev/sr0 would work since that's where knoppix 6.2.1 was found. Maybe I need to add something more to make it work or maybe I'm going down some rabbit hole.

    Any help would be appreciated.

  2. #2
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    Hi Chris2222

    I suggest you run hwinfo or lspci in order to find the vendor id and the product id of your SATA or IDE controller connected to your CDROM. Then you can try to find out if there was any kernel driver for your hardware in Linux 2.6. If there is a driver for a later Linux 2.6 kernel you could consider to remaster Knoppix 5.1.1 with that kernel.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


ORICO 5 Bay Raid Enclosure USB3.0 SATA External Hard Drive Enclosure Up to 80TB picture

ORICO 5 Bay Raid Enclosure USB3.0 SATA External Hard Drive Enclosure Up to 80TB

$115.59



ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT picture

ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT

$134.39



ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID picture

ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID

$54.27



Dell H2R6M PowerEdge PERC H700 6Gb/s 512MB SAS RAID Controller picture

Dell H2R6M PowerEdge PERC H700 6Gb/s 512MB SAS RAID Controller

$19.99



Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile picture

Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile

$15.98



WD MyBook Duo Raid Enclosure, no Drives picture

WD MyBook Duo Raid Enclosure, no Drives

$50.00



G-Technology G-Raid 4TB External Hard Drive 0G03257 (Good Condition) picture

G-Technology G-Raid 4TB External Hard Drive 0G03257 (Good Condition)

$60.00



Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT picture

Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT

$15.98



Vantec Dual M.2 SSD RAID PCIe X4 Host Card picture

Vantec Dual M.2 SSD RAID PCIe X4 Host Card

$45.00



Dell PowerEdge PERC H330 Mini Mono 12GB/s SAS SATA Raid Controller | 0GDJ3J | picture

Dell PowerEdge PERC H330 Mini Mono 12GB/s SAS SATA Raid Controller | 0GDJ3J |

$11.99