Results 1 to 2 of 2

Thread: knoppix 5.1.1 live cd stops (can't find knoppix file system)

  1. #1
    Member registered user
    Join Date
    Jul 2007
    Posts
    32

    knoppix 5.1.1 live cd stops (can't find knoppix file system)

    I posted in laptops, but I'm getting no bites and hopefully someone here has some technical knowledge and can provide some help.

    I'm trying to load Knoppix 5.1.1 live CD on a laptop (Toshiba S11). It works on the older S10 I have. I've tried lots options to no avail.
    So I popped in Knoppix 6.2.1 live CD and it booted up, it found knoppix 6 on /dev/sr0. So I went back to 5.1.1 just after searching for firewire/usb devices it starts to look for knoppix in sda1 and a bunch of others, it moved to fast I couldn't see. Then I get the "Can't find knoppix file system" error and it stops dead at a #knoppix prompt.

    If I type exit, it displays some more possible useful information "unable to mount file system." So I think it might have something to do with the controller? I've heard some SATA controllers weren't supported with older linux kernels? The kernel in knoppix 5.1.1 is version 2.6.19 if that helps. Maybe I should remaster a knoppix 5.1.1 with the same kernel in 6.2.1 and see if that works? I'm not sure, that's out of my expertise right now. The simplest way is hopefully able to find a combination setting so that it will be able to read the CD.

    I though maybe setting home=/dev/sr0 would work since that's where knoppix 6.2.1 was found. Maybe I need to add something more to make it work or maybe I'm going down some rabbit hole.

    Any help would be appreciated.

  2. #2
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    Hi Chris2222

    I suggest you run hwinfo or lspci in order to find the vendor id and the product id of your SATA or IDE controller connected to your CDROM. Then you can try to find out if there was any kernel driver for your hardware in Linux 2.6. If there is a driver for a later Linux 2.6 kernel you could consider to remaster Knoppix 5.1.1 with that kernel.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


New Cisco GLC-TE 1G SFP Copper RJ45 100m 1000BASE-T Transceiver Module picture

New Cisco GLC-TE 1G SFP Copper RJ45 100m 1000BASE-T Transceiver Module

$19.99



NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*

$18.00



New Sealed Cisco SFP-10G-LR 10GBASE-LR SFP Plug-in Transceiver Module picture

New Sealed Cisco SFP-10G-LR 10GBASE-LR SFP Plug-in Transceiver Module

$15.00



New HP HPE Aruba J4858D 1G SFP LC SX 850nm  500m MMF XCVR Transceiver Module picture

New HP HPE Aruba J4858D 1G SFP LC SX 850nm 500m MMF XCVR Transceiver Module

$28.49



NEW FS SFP-10G-T 10GBASE T SFP+ 30M Transceiver Module (Lot of 1 Unit) picture

NEW FS SFP-10G-T 10GBASE T SFP+ 30M Transceiver Module (Lot of 1 Unit)

$39.95



🔥🔥🔥SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GB SFP+ Multi Module🔥🔥 picture

🔥🔥🔥SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GB SFP+ Multi Module🔥🔥

$6.80



GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03 picture

GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03

$6.80



For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Transceiver, SFP+ to RJ45 10GBase-T picture

For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Transceiver, SFP+ to RJ45 10GBase-T

$49.99



Finisar Accessory FTLF1318P3BTL 1.25Gb/s SFP Transceiver RoHS Compliant 1310nm picture

Finisar Accessory FTLF1318P3BTL 1.25Gb/s SFP Transceiver RoHS Compliant 1310nm

$31.01



Lot (10) Dell 0N8TDR 850nm SFP-10G-SR-85C 10Gbs sfp+ FTLX8574D3BNL-FC N8TDR NEW picture

Lot (10) Dell 0N8TDR 850nm SFP-10G-SR-85C 10Gbs sfp+ FTLX8574D3BNL-FC N8TDR NEW

$68.00