Results 1 to 3 of 3

Thread: How can I force one of two KNOPPIX filesystems to be detected

  1. #1
    Member registered user
    Join Date
    Dec 2006
    Posts
    45

    How can I force one of two KNOPPIX filesystems to be detected

    I have a KNOPPIX boot stick and a KNOPPIX boot laptop.
    If I insert the stick into the laptop and fire the laptop up and visit Boot Order I can require the stick to be detected.
    (i.e. perfectly normal KNOPPIX practice for many of us.)
    However there then seems to occur a kind of "search" and although the stick was initially engaged, it is the laptop's KNOPPIX system that is detected and utilised thereafter.
    Can I force the stick to be the platform that is used?
    (The point of doing this is that I want to mess about with the laptop's filesystem - and so I want it to be "dead" not live while I do this.)
    Thank you!

  2. #2
    Junior Member
    Join Date
    Aug 2011
    Posts
    21
    If you look at /init file of Knoppix you will see the reason. Init file accomplishes this:

    # Its purpose:
    # 1. Mounting CD, DVD, Flashdisk or network drive,
    # 2. unifying read-only compressed file system and ramdisk or file overlay,
    # 3. give control to the real sysv init, which then continues to work like
    # we booted from a single disk partition.
    Init file is part of the initrd (in a running Knoppix OS it is: /init). You have to edit initrd to edit init file. The problem is that Knoppix's busybox (which is also part of initrd) does not support UUID detection. Instead, it uses the notations like /dev/sda, /dev/sdb ... But this method is not reliable: it can produce problems in case of multiple internal disks, external drives (USB stick) if more of them contains Knoppix OS because the first found instance will be used. The ideal solution would be that Knoppix use a busybox version that supports UUID detection so that can be applied a cheat code to give the UUID of boot device. Should be done a feature request...

    But even in present situation you can solve this problem if you do not use ISO boot. Look at Knoppix cheatcodes.

    ### Configuration / Persistent image ###
    knoppix knoppix_dir=KNOPPIX Directory to search for on the CD.
    So, you have to rename your KNOPPIX directories with unique names and give the desired name as boot parameter. Of course, in case of Knoppix ISO this is impossible.
    You can use this solution only if extract the ISO content and use your own boot parameters.
    For example the ISO content is copied to a USB stick and you boot Knoppix with GRUB2 installed to that stick. And the boot params are given in grub.cfg file.
    Last edited by szzsqing1; 04-14-2022 at 11:02 AM. Reason: busibox >> busybox

  3. #3
    Junior Member
    Join Date
    Aug 2011
    Posts
    21
    Rectification: in case of ISO boot you can resolve the problem, too. You can specify the ISO image file as boot parameter:
    knoppix bootfrom=/dev/sda1/KNX.iso Access image, boot from ISO-Image
    So you can rename the ISO files or put them in directories with unique names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


NEW SEALED Original CISCO SFP-10G-SR TRANSCEIVER MODULE GBIC (US Shipping) picture

NEW SEALED Original CISCO SFP-10G-SR TRANSCEIVER MODULE GBIC (US Shipping)

$18.00



GENUINE Cisco SFP-10G-SR V03 10-2415-03 Transceiver Module  picture

GENUINE Cisco SFP-10G-SR V03 10-2415-03 Transceiver Module

$8.90



SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module picture

SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module

$7.48



Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver picture

Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver

$7.70



Genuine Cisco SFP-10G-SR  TRANSCEIVERS -   picture

Genuine Cisco SFP-10G-SR TRANSCEIVERS -

$8.48



Cisco 1.25Gb 500m 850nm 1000Base-SX SFP Transceiver GLC-SX-MM picture

Cisco 1.25Gb 500m 850nm 1000Base-SX SFP Transceiver GLC-SX-MM

$2.94



CISCO SFP-GE-T Copper Transceiver Module   picture

CISCO SFP-GE-T Copper Transceiver Module

$10.99



10Gbe 10GB SFP+ transceiver for UniFi Switch 16 XG 10G 16port Ubiquiti US-16-XG picture

10Gbe 10GB SFP+ transceiver for UniFi Switch 16 XG 10G 16port Ubiquiti US-16-XG

$10.65



NEW Sealed Original CISCO SFP-10G-LR SFP TRANSCEIVER MODULE GBIC *US Shipping* picture

NEW Sealed Original CISCO SFP-10G-LR SFP TRANSCEIVER MODULE GBIC *US Shipping*

$25.00



New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Transceiver Module 1310nm 10km LC SMF picture

New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Transceiver Module 1310nm 10km LC SMF

$16.90