Hi,
I have been using this modified init script for knoppix-8.6.0 for sometime now,
code: https://github.com/insteps/scripts/t...er/knoppix/860
Currently its being used in usb method, but a similar approach would make
it usable via cdrom-boot too.
One can avoid write of iso to usb to start with customization.
Instead just boot the iso, which will detect drive/usb-drives
and look for eg. a folder knoppix<versionum> and layer union-mount
files like <knoppix><num>.sf4 contained in it OR folder <knoppix><num>.d
eg
/mnt/sda1/KNOPPIX860.sf4/KNOPPIX4.sf4
/mnt/sda1/KNOPPIX860.d/KNOPPIX4.d
Maybe not useful and safe enough to add in a distro, but this modification
helps me to add persistent changes and layer them over, even remove/re-add them later.
Thanks.
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6134 64C 1TB
$3299.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb
$599.99
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
CISCO 4194 1121 Secure Access Control System Media Convergence Server
$20092.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Dell PowerEdge C6400 Blade Server Chassis w/ 2x 2400W PSUs - Preproduction Model
$399.00
Dell PowerEdge M620 Blade Server
$39.99
UCSB-B200-M4 UCS Blade Server, 2x E5-2667 V3, 256GB RAM DDR4, 2x 300GB Drives
$299.99