I think you have to load the ipchains module. Try poking around with the 'modconf' command.
Hello allz ! Im trying to install a intranet
had eth0,eth1 & lo configurated when i put ifconfig as shown as well
but now i put echo 1 > /proc/sys/net/ipv4/ip_forward
enabling ip_forward to 1
then /sbin/ipchains -P forward DENY
return the ipchains: Protocol not available
also with /sbin/ipchains -A forward -j MASQ -s 192.168.0.0/16
return the ipchains: Protocol not available
is the kernel doesnt support it ?
plz help!
cheers from Spain!!!!
I think you have to load the ipchains module. Try poking around with the 'modconf' command.
WD 2TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0020BBK-WESN
$49.99
Seagate Exos X16 ST14000NM001G 14TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$157.99
Seagate Exos X22 ST20000NM004E 20TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$268.99
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$174.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$82.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$74.99
2 PACK Seagate ST1000LM035 Mobile HDD 1TB 2.5" SATA III Laptop Hard Drive
$27.25
HDD-T10T-SM0F27495 - Supermicro 10TB 7.2K 6G SATA 3.5" HDD HUH721010ALE604
$43.74
Seagate Exos X22 ST22000NM001E 22TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$311.99