I think you have to load the ipchains module. Try poking around with the 'modconf' command.
Hello allz ! Im trying to install a intranet
had eth0,eth1 & lo configurated when i put ifconfig as shown as well
but now i put echo 1 > /proc/sys/net/ipv4/ip_forward
enabling ip_forward to 1
then /sbin/ipchains -P forward DENY
return the ipchains: Protocol not available
also with /sbin/ipchains -A forward -j MASQ -s 192.168.0.0/16
return the ipchains: Protocol not available
is the kernel doesnt support it ?
plz help!
cheers from Spain!!!!
I think you have to load the ipchains module. Try poking around with the 'modconf' command.
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$139.99
Dell Poweredge R730xd 12 Bay LFF 2x SFF 2x E5-2680v3 2.5ghz H730p No Ram No HDD
$219.99
Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD 
$180.00
Dell R630 8 SFF Server 2x E5-2650 V4 2.2GHz = 24 Cores 64GB DDR4 SATA Only 1x PS
$243.20
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$489.99
DELL PowerEdge R630 8SFF Server 2x E5-2697v3 2.6GHz =28 Cores 128GB H730 4xRJ45
$352.00
Dell Poweredge R420 3.5" 2x Xeon E5-2430 2.2ghz 12-Cores 24gb 2x 1TB 2x 550w
$169.99