i read somewhere that it won't boot if it's on a ntfs partition, so i haven't tried
Would the following work??
1. Use the tohd=/dev/hda1 to get the compressed Knoppix image written to a FAT32 partition.
2. Copy this compressed Knoppix image file to an NTFS partition. Using Bill's Windows
3. Then boot with fromhd=/dev/hda1 using the boot image file previously copied to the NTFS partition in step 2 above.
If the compressed Knoppix image is already on the NTFS partition will the fromhd=/dev/hda1 boot option work?
What will happen if a person used the tohd=/dev/hda1 boot option if /dev/hda1 were a NTFS partition? Will it give you a warning Will Robinson error message? or what?
I would like to get the compressed Knoppix boot image installed onto my NTFS drive at home then boot using the fromhd boot option for faster boots.
Thanks Much In Advance for any help
Ron
i read somewhere that it won't boot if it's on a ntfs partition, so i haven't tried
why steps 1 and 2 ?Originally Posted by rrolsbe
only
Use windows. Copy your knoppix cd folder \KNOPPIX to NTFS partition
3. Then boot with fromhd=/dev/hda1
Unless the new KNOPPIX has been changed, booting from NTFS is impossible with the stock kernel 2.4 NTFS driver.Originally Posted by oscar
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
CISCO 5108 Blade Server Chassis N20-C6508
$200.00
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
DELL POWEREDGE M620 SERVER BLADE INTEL XEON E5-2670 @ 2.60GHZ 128GB RAM 2X 146GB
$399.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M640 Dual Bay 2.5" SFF Blade Server Barebone No Processors No RAM
$250.00
Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb
$599.99
Dell PowerEdge M620 Blade Server
$39.99